24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

Technical guides

Clear explanations of concepts, methods, standards and measurements for engineers and technicians.

  • How does a four-sensor multi-gas detector work?

    A four-sensor multi-gas detector simultaneously measures oxygen, combustible gases, carbon monoxide and hydrogen sulfide, each with its own sensor, and goes into alarm when any of them moves outside the configured limits.

  • How does a function generator work?

    A function generator produces periodic electrical signals of known shape, such as sine, square or triangle, with adjustable frequency and amplitude, to stimulate circuits and observe their response.

  • How does a gas chromatograph for oil work?

    A gas chromatograph separates the components of a gas mixture by passing it with a carrier gas through a column in which each gas advances at a different speed, and quantifies them with detectors at the outlet.

  • How does a ground-fault circuit interrupter for personnel protection work?

    A ground-fault circuit interrupter for personnel protection compares the current leaving on the phase conductor with the current returning on the neutral; if a difference of a few milliamperes takes another path, it opens the circuit in a fraction of a second.

  • How Does a High-Voltage Divider Work?

    A high-voltage divider uses two series impedances to reduce a high voltage to a small, proportional voltage that can be measured with a conventional instrument.

  • How Does a Marx Impulse Generator Work?

    A Marx generator charges several capacitors in parallel and discharges them in series through spark gaps, so that the output voltage is approximately the sum of the charging voltages of each stage.

  • How Does a Medium-Voltage Potential Transformer Work?

    A medium-voltage potential transformer reduces the system voltage to a standardized, safe value, proportional to and in phase with the original, to supply meters, protection and control.

  • How Does a Megohmmeter Work?

    A megohmmeter generates a high DC voltage, applies it to the insulation under test, measures the tiny current that flows and displays the resistance obtained from Ohm's law.

  • How does a non-contact voltage detector work?

    A non-contact voltage detector senses the alternating electric field around an energized conductor through an internal antenna and converts it into a light or sound indication, without needing a closed circuit with the conductor.

  • How does a photovoltaic cell work?

    A photovoltaic cell converts light into electricity through a semiconductor p-n junction: photons generate electron-hole pairs and the junction's internal field separates them, producing a direct current when the circuit is closed.

  • How does a piezoelectric accelerometer work?

    A piezoelectric accelerometer works because a piezoelectric crystal or ceramic generates an electric charge proportional to the force it receives, and that force comes from a seismic mass that compresses the material as it accelerates with the base.

  • How Does a Power Transformer Work?

    A power transformer transfers energy between two or more windings by electromagnetic induction: an alternating flux in a magnetic core induces in each winding a voltage proportional to its number of turns.

  • How does a pressure transmitter work?

    A pressure transmitter converts process pressure into a standardized electrical signal: a sensing element deforms, the electronics condition that deformation and deliver an output, commonly a loop current.

  • How Does a Reference Horn Antenna Work?

    A horn antenna is a waveguide that flares gradually out to an aperture, so that the guided wave is transformed into a radiated wave with a smooth transition and highly predictable directivity, which makes it useful as a reference standard.

  • How does a reverberation chamber work?

    A reverberation chamber is a closed metal cavity with a mode stirrer that changes the field distribution; averaging over the stirrer positions yields a statistically uniform, isotropic field, which is used to test immunity or to measure total radiated power.

  • How does a Rogowski coil work?

    A Rogowski coil is a winding with no magnetic core placed around the conductor. By Faraday's law, its output voltage is proportional to the derivative of the current, and an integrator converts it into a signal proportional to the current.

  • How does a salt spray chamber work?

    A salt spray chamber atomizes a sodium chloride solution inside a temperature-controlled enclosure, so that the parts become coated with a wet saline film that accelerates corrosion.

  • How Does a Schering Bridge Work?

    The Schering bridge compares an unknown lossy capacitor with a nearly lossless standard capacitor; when the detector indicates balance, the components of the adjustable arm give the capacitance and the dissipation factor.

  • How Does a Soft Starter Work?

    A soft starter controls the start of an induction motor by gradually increasing the applied voltage through thyristors, which reduces starting current and torque without changing the frequency.

  • How does a string inverter work?

    A string inverter converts the direct current from one or more module strings into alternating current synchronized with the grid, while seeking the maximum power point of each input and monitoring the grid and the insulation.

  • How Does a Swept Spectrum Analyzer Work?

    It is a superheterodyne receiver that mixes the signal with a swept local oscillator, filters it with a narrow intermediate-frequency filter and detects it, displaying the level of each frequency as the sweep advances.

  • How does a thermal camera form an image?

    Using an infrared-transparent lens, the camera focuses thermal radiation from the scene onto a detector array; each element converts that power into a signal that is calibrated to temperature.

  • How does a thermocouple work?

    A thermocouple works because two different metals or alloys, joined at one end, generate a voltage that depends on the temperature difference between that end and the other, through the Seebeck effect.

  • How does a three-pole and four-pole earth ground tester work?

    An earth ground tester injects alternating current between the electrode under test and an auxiliary electrode, measures the voltage at a probe and calculates the resistance; the three-pole version includes the connection lead in the reading and the four-pole version excludes it.

  • How does a vector signal analyzer work?

    A vector signal analyzer captures a radio frequency signal, converts it to in-phase and quadrature components, demodulates it in software and measures its quality, displaying the spectrum as well as the constellation and the modulation errors.

  • How does a vehicle insulation monitor work?

    An insulation monitor watches the resistance between the high-voltage poles and the chassis by measuring its leakage with a signal or a voltage bridge, and it issues a warning or opens the contactors when the resistance falls below the threshold.

  • How does a voltage event recorder work?

    A voltage event recorder continuously calculates the RMS value per half cycle and, when it crosses a configured threshold, stores the event with its start, its duration and its residual or maximum voltage, sometimes with the waveform.

  • How does an AC high-voltage tester work for insulation testing?

    An AC high-voltage tester applies an adjustable alternating voltage to the insulation, generated by a step-up transformer, and measures the current flowing; if that current exceeds a set limit or a discharge occurs, the unit disconnects and signals the failure.

  • How does an arc flash face shield protect the wearer?

    An arc flash face shield protects the face, eyes and neck with a transparent shield that absorbs or blocks part of the radiation and heat, and that withstands the impact of particles and the pressure of the event.

  • How does an electrochemical gas sensor work?

    An electrochemical gas sensor works like a small cell: the gas passes through a membrane, reacts at a working electrode and the current generated is proportional to its concentration.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer