24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

Dielectric materials

Clear explanations of concepts, methods, standards and measurements for engineers and technicians.

  • Contact or non-contact electrode measurement?

    With contact electrodes, the sample is measured between plates or resting on a probe, which is simple and sensitive but exposed to air gaps; non-contact measurement uses a field through air or free space, avoiding any alteration of the sample but with lower accuracy.

  • Epoxy or polyester resin as an insulator?

    Epoxy resin usually outperforms polyester in adhesion, dimensional stability, chemical resistance and electrical properties under humidity, while polyester is less expensive, cures quickly and serves in less demanding applications.

  • Free space or transmission line for measuring materials?

    Free space suits high frequencies, large flat parts and tests without contact or machining; a transmission line offers greater accuracy and broad bandwidth at lower frequencies, but requires a machined sample that fits the section well.

  • How does an impedance meter for materials work?

    An impedance meter for materials applies an AC signal of known frequency to a sample, measures the voltage and current with their phase relationship, and calculates the complex impedance, from which capacitance, losses, permittivity or permeability are obtained.

  • How does the permittivity of a polymer change with frequency?

    The permittivity of a polymer decreases with frequency in steps, as the slower polarization mechanisms (dipolar and interfacial) stop following the field, and each step is accompanied by a dielectric loss peak.

  • How Is a Conformal Coating Evaluated?

    A conformal coating is evaluated by confirming that it covers continuously and uniformly, that it adheres, that it maintains its insulation under moisture and temperature, and that it protects against contamination and corrosion without damaging the circuit.

  • How is a material conditioned before testing?

    Conditioning a material before testing means bringing it to a defined, stable state of temperature and humidity, so that the measured property reflects the material and not its recent storage history.

  • How Is a Material Selected for a High-Voltage Connector?

    To select a material for a high-voltage connector, you evaluate its dielectric strength, its resistance to tracking and partial discharges, its thermal and mechanical stability and its compatibility with the environment, together with the geometry and the insulation distances.

  • How Is a Microwave Absorbing Material Verified?

    A microwave absorbing material is verified by measuring its reflectivity, or return loss, and its attenuation in the band of interest, normally in free space or with a transmission line, and by characterizing its complex permittivity and permeability.

  • How is a solid sample prepared for measuring dielectric properties?

    A solid sample for measuring dielectric properties must have flat, parallel faces, a uniform and known thickness, a clean surface and a controlled moisture state, because any geometric defect becomes a permittivity error.

  • How Is a Substrate Selected for a Printed Antenna?

    For a printed antenna, the substrate is selected according to its permittivity, loss tangent, thickness, stability with temperature and moisture, and manufacturing tolerances, because these parameters set the bandwidth, efficiency and frequency.

  • How is surface tracking resistance measured?

    Surface tracking resistance is measured by subjecting the surface of the insulator to voltage and to controlled wet contamination, and observing whether conductive paths form or whether the material fails under a defined criterion.

  • How is the dielectric breakdown of an insulating sheet measured?

    The dielectric breakdown of an insulating sheet is measured by applying a rising voltage between standardized electrodes until the material fails, and it is expressed as dielectric strength: breakdown voltage divided by thickness.

  • How is the dielectric measurement method chosen according to frequency?

    The dielectric measurement method is chosen according to the frequency range: at low frequency, parallel-plate cells with an impedance bridge are used; at radio and microwave frequencies, the choice moves to probes, transmission lines, free space or resonant cavities.

  • How is the homogeneity of a laminate verified?

    The homogeneity of a laminate is verified by comparing a property at different points and layers, and by complementing this with non-destructive inspection and cross-sections, to detect voids and variations in thickness and in resin or reinforcement content.

  • How is the loss tangent of a printed circuit substrate measured?

    The loss tangent of a printed circuit substrate is measured by exciting it with a high-frequency field and determining how much energy it dissipates relative to what it stores; at microwave frequencies, resonant methods are preferred for their sensitivity.

  • How is the magnetic permeability of a material measured?

    The magnetic permeability of a material is measured by exciting it with a known magnetic field and measuring the resulting induction, or through the inductance of a coil containing it or the change in a transmission line loaded with it.

  • How is the moisture absorption of an insulator evaluated?

    The moisture absorption of an insulator is evaluated by comparing the mass of a dry specimen with its mass after exposure to water or to a defined humid atmosphere, and it is expressed as the mass increase relative to the dry mass.

  • How is the operating temperature of an insulator determined?

    The operating temperature of an insulator is determined by evaluating how its properties degrade over time at different temperatures, and setting the temperature at which it maintains an acceptable level throughout the expected life.

  • How is the permittivity of a powder measured?

    The permittivity of a powder is measured by compacting it or containing it in a sample holder of known geometry, measuring the effective permittivity of the mixture of particles and air, and correcting it with a mixing model to estimate that of the solid material.

  • How is the permittivity of an insulating liquid measured?

    The relative permittivity of an insulating liquid is measured in a guarded electrode cell: the capacitance with the liquid is determined and divided by the capacitance of the same cell empty or with a reference fluid, at controlled temperature and frequency.

  • How is the temperature dependence of permittivity measured?

    The temperature dependence of permittivity is measured by placing the sample in a measurement fixture inside a temperature-controlled oven or chamber, and recording permittivity and losses at different temperatures, waiting for thermal equilibrium at each one.

  • How is the volume resistivity of an insulator measured?

    The volume resistivity of an insulator is measured by applying a DC voltage between two electrodes across the thickness of the sample, measuring the current passing through its volume, and calculating the ratio using the geometry.

  • Polymer or ceramic as an electrical insulator?

    Polymers usually win on processability, toughness and low weight, and ceramics on thermal stability, hardness and resistance to arcing and weathering; the choice depends on temperature, mechanical stress, shape and manufacturing cost.

  • Rigid or flexible substrate for high-frequency circuits?

    A rigid substrate offers better dimensional stability, impedance control and heat dissipation, while a flexible one can be folded and integrated into curved geometries, at the cost of greater sensitivity to deformation and moisture at high frequency.

  • What causes carbonization of an insulator surface?

    Surface carbonization of an insulator is caused by the localized heat of small discharges or arcs on the surface, which decomposes the organic polymer and leaves carbon, a conductive residue that facilitates further discharges.

  • What Does “Anisotropy” Mean in a Material?

    A material is anisotropic when its properties depend on the direction in which they are measured; in an insulator this affects dielectric strength, permittivity, thermal conductivity and expansion.

  • What Does “Dimensional Stability” of an Insulator Mean?

    The dimensional stability of an insulator is its ability to keep its shape and dimensions under temperature, moisture, mechanical stress and the passage of time; if it fails, clearances, fits and insulation distances are altered.

  • What does IEC 60093 define for resistivity?

    IEC 60093 establishes methods for measuring the volume and surface resistivity of solid electrical insulating materials, defining electrodes, DC voltage, electrification time, conditioning and calculation.

  • What does the ASTM D149 dielectric breakdown standard cover?

    ASTM D149 describes how to determine the breakdown voltage and dielectric strength of solid electrical insulating materials at power frequencies, by applying an increasing voltage to a sample until it fails.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer