Operating principle
In a healthy circuit, the current on the phase conductor equals the current returning on the neutral. If part of that current goes to ground, for example through a person touching a conductor, the sum is no longer zero. The interrupter has a toroidal transformer surrounding both conductors that detects this imbalance. If the imbalance exceeds its threshold, a trip mechanism opens the circuit.
Why it is called “for personnel”
The sensitivity of these devices is chosen so that they act on currents in the range of a few milliamperes and in a very short time, so that the circuit is interrupted before the current through the body reaches values capable of causing ventricular fibrillation. A higher-sensitivity device protects against direct contact; others with a higher threshold protect only against fire or against equipment faults.
What the user sees
- The device trips when there is a ground leakage above the threshold, not on overload.
- Apparently unexplained tripping can occur when several pieces of equipment add up small, normal leakages, for example from interference filters.
- It has a test button that simulates a leak and must be used periodically to check the mechanism.
Common types
- Built into a receptacle: they protect that point and, depending on the model, those downstream.
- In the panel circuit breaker: they protect an entire circuit.
- Portable: for use with tools on construction sites or outdoors.
Where they are most used
Damp locations or those with a greater likelihood of contact with ground: bathrooms, kitchens, outdoors, washing areas and construction sites, as well as wherever portable tools are used.
Limitations
It does not detect simultaneous contact with phase and neutral, because in that case the current returns through the circuit and there is no imbalance. Nor does it replace grounding or the other protective measures. It must be tested regularly. Installation and testing must be carried out by qualified personnel in accordance with the applicable regulations.