24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

How does a four-sensor multi-gas detector work?

A four-sensor multi-gas detector simultaneously measures oxygen, combustible gases, carbon monoxide and hydrogen sulfide, each with its own sensor, and goes into alarm when any of them moves outside the configured limits.

What it measures and why that combination

The typical four-sensor configuration covers the most frequent atmospheric hazards in confined spaces: oxygen (deficiency or excess), combustible gases (risk of fire or explosion), carbon monoxide and hydrogen sulfide (toxicity). It is not the only possible configuration, but it is the most common because these four hazards are frequent.

How it works inside

Measurement Usual sensor type
Oxygen Electrochemical cell
Combustibles Catalytic or infrared
Carbon monoxide Electrochemical cell
Hydrogen sulfide Electrochemical cell

Each sensor delivers an electrical signal; a processor converts it into a reading and compares it with the alarm thresholds. The sample reaches the sensor by diffusion (the air enters on its own) or through a pump that draws it through a hose, which makes it possible to measure remotely before entry.

Alarms

There are normally audible, visual and vibrating alarms, with warning and danger levels. For oxygen they are configured in both directions: low and high. Some instruments also log readings and events, which is useful for reviewing what happened.

What it does not do

  • It does not detect all hazards. Other toxic gases, specific vapors or combustible dusts are not covered unless there is a sensor for them.
  • It does not identify the combustible gas; it only estimates proximity to the explosive limit.
  • It does not replace ventilation, isolation or the rescue plan.

Maintenance that underpins confidence

Sensors degrade: the oxygen cell is consumed, electrochemical cells drift and the catalytic sensor can be poisoned. The functional test before use and periodic calibration are what make the reading valid. A zero reading from a damaged sensor is worse than having no instrument, because it gives false reassurance.

What the user sees

A display with four readings and a status indicator. If a reading rises or falls unexpectedly, the response is to get out and check from outside. Use and interpretation are the responsibility of trained personnel, in accordance with applicable regulations.

This guide is for information only. Work involving electrical hazards, heights or hazardous atmospheres must be carried out by qualified, authorized personnel in accordance with applicable regulations.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer