24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

Technical guides

Clear explanations of concepts, methods, standards and measurements for engineers and technicians.

  • What does “ground loop” mean?

    It is a closed circuit formed by two or more ground connections of the same signal system; the potential difference between those grounds, or the magnetic flux crossing the loop, drives currents that appear as noise.

  • What does “grounding” mean?

    It is the intentional electrical connection of a system or piece of equipment to the mass of the earth through an electrode, to provide safety for people, a potential reference and a path for fault and discharge currents.

  • What does “hermetically sealed” mean?

    Hermetically sealed means that the transformer is built and operated with no exchange with the atmosphere: the oil stays isolated from the air, and its expansion is absorbed by the tank itself or by a flexible element.

  • What does “IDLH” mean?

    IDLH stands for “Immediately Dangerous to Life or Health”: a condition in which an exposure can cause death or irreversible effects, or prevent escape.

  • What Does “Libranza” Mean?

    In the electrical field, a libranza is the formal authorization to work on equipment or a circuit that has been disconnected, isolated, verified de-energized and grounded, under the responsibility of identified persons.

  • What does “measurand” mean?

    The measurand is the particular quantity to be measured, defined with sufficient precision: not “the temperature”, but the temperature of a certain fluid, at a specific point and under specific conditions.

  • What does “MPPT” mean?

    MPPT stands for maximum power point tracking. It is the function that adjusts the operating point of a photovoltaic array so that it delivers the greatest possible power under the light and temperature conditions of the moment.

  • What does “point of common coupling” mean?

    The point of common coupling, or PCC, is the point on the grid where one user's installation and other users connect, and where the effects of that installation on the others are evaluated.

  • What does “pretrigger” mean?

    Pretrigger is the part of the capture that corresponds to the moments before the trigger event, and it is possible because a digital oscilloscope records continuously into a circular memory and keeps what happened beforehand.

  • What does “qualified personnel” mean?

    “Qualified personnel” means a person who, through training, knowledge and experience, recognizes the electrical hazards of a specific task and knows how to control them, and who has also been authorized by the employer to perform it.

  • What does “single point of failure” mean?

    A single point of failure is a component, connection or service whose failure alone stops the entire system because there is no backup or alternative path to replace it.

  • What Does “Tap” Mean on a Transformer?

    A tap is a connection point on a winding that makes it possible to change the number of turns in service and, with it, the transformer's turns ratio.

  • What does “vehicle-to-grid” mean?

    “Vehicle-to-grid” refers to the ability of an electric vehicle to return energy from its battery to the electrical grid as well as charge from it, which requires a bidirectional converter, synchronization with the grid and communication with the operator.

  • What does “waterfall” mean in vibration analysis?

    In vibration analysis, a waterfall is a three-dimensional display that stacks successive spectra to show how frequencies and amplitudes change with time or with machine speed.

  • What does a silica gel breather do on a transformer?

    The silica gel breather dries the air that enters the transformer when the oil contracts on cooling, so that atmospheric moisture does not reach the oil or the insulating paper.

  • What does a solar charge controller do?

    A solar charge controller regulates the current flowing from the PV generator to the battery to charge it without overcharging it, and usually also protects against excessive discharge and reversed connections.

  • What does a traction inverter do?

    A traction inverter converts the battery's direct current into alternating current of variable voltage and frequency for a vehicle's electric motor, and in doing so controls its torque and speed.

  • What Does a Variable Frequency Drive Do?

    A variable frequency drive controls the speed and torque of an AC motor, generating a voltage of adjustable amplitude and frequency from the supply by means of a rectifier, a DC bus and an inverter.

  • What does a winding temperature indicator show?

    A winding temperature indicator estimates the temperature of the hottest spot in the winding by adding to the oil temperature an increment proportional to the load current; it does not measure the winding directly.

  • What does ASTM D3487 cover for mineral insulating oils?

    ASTM D3487 is a specification standard for new mineral insulating oil for use in electrical apparatus; it sets the physical, electrical, and chemical properties the oil must meet before use.

  • What does ASTM E1933 say about emissivity?

    ASTM E1933 brings together test methods for measuring the emissivity of a surface with a radiometric camera and for compensating for it, so that the displayed temperature comes close to the true temperature.

  • What does ASTM F1506 measure for arc-resistant textiles?

    ASTM F1506 is a performance specification for textiles used in clothing for electrical workers. It measures their flame resistance and arc rating, that is, how much arc energy they withstand before the heat transmitted reaches the skin in a harmful way.

  • What does CAT mean in a measurement category?

    CAT is an instrument's measurement overvoltage category: it indicates in which part of an electrical installation the instrument can be safely connected, based on the available energy and the transient overvoltage it must withstand.

  • What does CISPR 11 regulate for industrial equipment?

    CISPR 11 sets the limits and measurement methods for radio disturbances from industrial, scientific and medical (ISM) radio-frequency equipment, classified into Groups 1 and 2 and Classes A and B. Several types of industrial equipment, such as adjustable-speed drives, are governed by their own product standard.

  • What Does CISPR 16-1-4 Specify for Measurement Antennas?

    CISPR 16-1-4 sets requirements for the antennas and test sites used to measure radiated disturbances, so that emissions measurements made in different laboratories are comparable.

  • What does CISPR 32 regulate for multimedia equipment?

    CISPR 32 sets the radio disturbance emission requirements for multimedia equipment, that is, information technology equipment and audio and video broadcast and receiving equipment. It covers conducted and radiated emissions, with equipment classes according to the environment of use.

  • What does dBi mean?

    dBi means decibels relative to an isotropic radiator: it expresses, on a logarithmic scale, how many times the antenna concentrates power in one direction compared with an ideal antenna that radiates equally in all directions.

  • What does dBm mean?

    dBm is the power level expressed in decibels relative to one milliwatt. Zero dBm equals one milliwatt, and every ten decibels up or down multiplies or divides the power by ten.

  • What does dwell time mean in a thermal cycle?

    Dwell time is the period for which the temperature is held at one extreme of the cycle, once the sample has reached it, so that the sample stabilizes and the effects of the test develop.

  • What does effective value or true RMS mean?

    The true effective value, or true RMS, is the value of a signal that produces the same heating in a resistor as a direct current of that value, calculated from the actual waveform.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer