24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

Technical guides

Clear explanations of concepts, methods, standards and measurements for engineers and technicians.

  • What Does EIRP Mean?

    EIRP is equivalent isotropic radiated power: the power that would have to be fed to an ideal isotropic antenna to produce, in the direction of maximum radiation, the same power density as the real antenna.

  • What does electromagnetic “susceptibility” mean?

    Electromagnetic susceptibility is the tendency of equipment to degrade in operation when it receives an electromagnetic disturbance; it is the opposite side of immunity, which is the ability to resist it.

  • What Does IEC 60085 Classify in the Thermal Rating of Insulation?

    The IEC 60085 standard classifies electrical insulation systems by their thermal endurance, assigning a class associated with the maximum continuous service temperature for which they are considered suitable.

  • What does IEC 60093 define for resistivity?

    IEC 60093 establishes methods for measuring the volume and surface resistivity of solid electrical insulating materials, defining electrodes, DC voltage, electrification time, conditioning and calculation.

  • What does IEC 60296 specify for new mineral oils?

    IEC 60296 is an international standard that specifies the requirements a new, unused mineral insulating oil must meet for transformers and switchgear, and the test methods associated with each requirement.

  • What does IEC 60599 say about dissolved gases?

    IEC 60599 is a guide to interpreting the analysis of dissolved and free gases in in-service electrical equipment insulated with mineral oil, and it proposes how to recognize fault types from the gases and their ratios.

  • What does IEC 61000-4-30 define for measuring power quality?

    IEC 61000-4-30 defines how to measure power quality parameters in AC networks, with methods, aggregation intervals and performance classes so that measurements are comparable. It does not set acceptable limits.

  • What does IEC 61010-1 establish for measuring equipment?

    IEC 61010-1 sets the general safety requirements for electrical equipment for measurement, control and laboratory use, in order to protect the user against electric shock, burns, fire and other hazards.

  • What does IEC 61025 set out on fault trees?

    IEC 61025 is an international standard that describes fault tree analysis: how to build the tree, which symbols to use and how to evaluate it qualitatively and quantitatively.

  • What does IEC 61724-1 contribute to system monitoring?

    IEC 61724-1 establishes how to instrument and monitor a photovoltaic system: what to measure, with which sensors, how to log the data and how to calculate indicators such as the performance ratio to compare production against what was expected.

  • What does IEC 62740 set out on root cause analysis?

    IEC 62740 is an international standard that describes root cause analysis: its phases, how to choose the right techniques and how to document and follow up on the conclusions.

  • What does IEEE 1159 classify on electromagnetic phenomena?

    IEEE 1159 is a recommended practice for monitoring electric power quality that classifies electromagnetic phenomena by category, typical duration and typical magnitude, and provides a common vocabulary for describing them.

  • What does IEEE 493 compile on industrial system reliability?

    IEEE 493 is a recommended practice that brings together methods and data for designing and evaluating the reliability of industrial and commercial electrical systems.

  • What does IEEE 519 establish on harmonic distortion?

    IEEE 519 is a recommended practice that establishes how to limit harmonic distortion at the point of common coupling: it restricts the harmonic current each user injects and the voltage distortion the grid must maintain.

  • What Does ISO 10012 Set Out for Measurement Processes?

    This standard sets out the requirements for a measurement management system: how an organization controls its measurement processes and equipment to ensure they are suitable for the intended use. Consult the current edition.

  • What does ISO 14224 compile on reliability data?

    ISO 14224 establishes a common way of collecting and exchanging equipment reliability and maintenance data, with a taxonomy and uniform definitions of failures, causes and mechanisms.

  • What does ISO 15118 set out on vehicle-to-grid communication?

    ISO 15118 defines the digital communication between the electric vehicle and the charging station, which makes it possible to negotiate charging parameters, authenticate securely, bill automatically and, in recent editions, coordinate bidirectional charging.

  • What does ISO 18434-1 establish on thermography?

    ISO 18434-1 is a standard in the series on condition monitoring and diagnostics of machines that establishes general procedures for applying infrared thermography as a diagnostic technique.

  • What does ISO 18436-2 cover on analyst certification?

    ISO 18436-2 defines the competence requirements and the assessment and certification criteria for personnel who perform machine condition monitoring and diagnostics using vibration, organized in categories according to level of responsibility.

  • What does ISO 18436-7 cover on personnel certification?

    ISO 18436-7 sets requirements for the qualification and assessment of personnel performing thermography in condition monitoring and diagnostics of machines, and for the bodies that certify them.

  • What does ISO 1940-1 classify in balancing?

    ISO 1940-1 classifies the balance quality of rigid rotors through balance quality grades that make it possible to determine the permissible residual unbalance according to the rotor type and its service speed.

  • What does ISO 6469-3 on electrical safety cover?

    ISO 6469-3 specifies the electrical safety requirements for electric road vehicles: voltage classes, protection against electric shock, insulation, equipotential bonding and insulation monitoring of the high-voltage system.

  • What does ISO 9227 cover on salt spray?

    ISO 9227 specifies the equipment, reagents and conditions for corrosion tests in an artificial salt spray atmosphere, used to evaluate metals and coatings.

  • What does MTBF mean?

    MTBF stands for mean time between failures and is the average operating time between consecutive failures of a repairable product; it is neither the useful life nor the time after which the product fails.

  • What Does NOM-001-SEDE Cover?

    NOM-001-SEDE is the Mexican official standard that sets the safety requirements for electrical utilization installations, that is, those on the load side after the supply delivery point.

  • What does NOM-017-STPS require for personal protective equipment?

    NOM-017-STPS sets the requirements for selecting, using and handling personal protective equipment in workplaces, based on a risk analysis and on the fact that other control measures do not fully eliminate the hazard.

  • What does NOM-029-STPS require?

    NOM-029-STPS sets safety conditions for maintenance activities on electrical installations in workplaces, in order to prevent risks to workers; its exact scope must be checked in the current edition.

  • What does NOM-033-STPS establish?

    NOM-033-STPS is the Mexican standard that sets safety conditions for work in confined spaces: it calls for identifying them, assessing their hazards, authorizing entry, measuring the atmosphere, training personnel and having rescue in place.

  • What does OSHA 1910.146 require?

    OSHA 1910.146 regulates entry into permit-required confined spaces in general industry in the United States: it requires employers to identify them, control their hazards and organize entry with roles, a permit and rescue.

  • What does part 2-14 of the IEC 60068 series cover on change of temperature?

    Part 2-14 of the IEC 60068 series describes change-of-temperature tests, with variants that differ in the rate of change and the medium used, to evaluate the effect of thermal transitions on a product.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer