24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

What does CISPR 32 regulate for multimedia equipment?

CISPR 32 sets the radio disturbance emission requirements for multimedia equipment, that is, information technology equipment and audio and video broadcast and receiving equipment. It covers conducted and radiated emissions, with equipment classes according to the environment of use.

What equipment it refers to

CISPR 32 applies to multimedia equipment, a category that brings together under a single standard information technology equipment and audio, video and broadcast equipment. It covers computers, monitors, network equipment, televisions, receivers, consoles and similar products. It replaced the earlier standards CISPR 13 and CISPR 22, which dealt with those families separately.

What it regulates

  • Conducted emissions into the power supply network and into telecommunications and signal ports.
  • Radiated emissions in the frequency ranges established by the standard, with measurement methods that refer to the CISPR measurement methods standard.
  • Equipment classes: Class B is associated with the domestic environment and with equipment that can be used in residential areas, with stricter limits; Class A is intended for non-residential environments, with less strict limits and warnings to the user.
  • Operating conditions and configuration: representative operating modes, and the arrangement of cables and peripherals.

What it does not regulate

CISPR 32 deals with emissions. The immunity of multimedia equipment is addressed in another standard in the family, CISPR 35. Nor does it replace electrical safety requirements, which are found in separate standards.

How it is used in a project

  1. Determine whether the product is multimedia equipment and which class it is intended for.
  2. Identify the ports to be evaluated: power, network, signals, antennas.
  3. Plan the design with clock emissions, fast interfaces and switching power supplies in mind.
  4. Check during the development phase with pre-evaluation, and reserve a margin relative to the limit.

Current edition and local regulation

This guide only summarizes the general scope. Limits, frequency ranges and methods change between editions, and whether the standard is mandatory depends on each country’s regulations, which may adopt it with modifications. Consult the current edition and the regulatory reference that applies in your market.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer