24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

How is a material conditioned before testing?

Conditioning a material before testing means bringing it to a defined, stable state of temperature and humidity, so that the measured property reflects the material and not its recent storage history.

The reason for conditioning

Many electrical and mechanical properties change with absorbed moisture and with temperature. A hygroscopic polymer fresh from a damp warehouse does not measure the same as a dry one. If two samples are tested in different states, the difference may be due to their history and not the material. Conditioning means equalizing the starting point.

What is controlled

  • Temperature: influences molecular mobility, dielectric losses and dimensions.
  • Relative humidity: determines how much water reaches equilibrium in materials that absorb it.
  • Time: equilibrium is reached by diffusion, which depends on thickness. A thick part takes much longer than a thin sheet.
  • Surface cleanliness: sometimes part of the procedure.

Drying and equilibrium: two different goals

Some procedures aim for a dry state, using an oven or desiccator, and others aim for equilibrium with an atmosphere of defined humidity. They are not interchangeable. Drying requires a temperature that does not degrade or deform the material, and the sample must then be kept isolated from moisture until the test, for example in a desiccator. Equilibrium with a defined atmosphere requires a chamber or enclosure with humidity and temperature control.

How to know the state has been reached

A practical criterion is to weigh the sample at intervals: when the mass stops changing within an acceptable margin, the water content has stabilized. The margin and intervals are set by the applicable procedure. For large thicknesses the time can be days or more, so it should be planned from the outset.

What the engineer sees when it is missing

  • Results that drift during the measurement, for example losses that increase as moisture is absorbed.
  • Differences between laboratories that disappear with identical conditioning.
  • Dimensions that change between the thickness measurement and the test.

Record keeping

The report must state the conditioning applied and the environment during the test. Without that, the result lacks context and cannot be reproduced.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer