24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

How Is a Microwave Absorbing Material Verified?

A microwave absorbing material is verified by measuring its reflectivity, or return loss, and its attenuation in the band of interest, normally in free space or with a transmission line, and by characterizing its complex permittivity and permeability.

What an absorber must achieve

It must convert incident electromagnetic energy into heat instead of reflecting or transmitting it. To do so, it must have an impedance similar to that of air at the input, so that the wave penetrates, and enough loss for the wave to dissipate before it comes back out. Verifying it means confirming that it achieves this in the required band and at the required angles.

Reflectivity measurement

This is the main test. An antenna transmits onto a plate of the absorber backed by a metal plane, and the amount returned is measured relative to the reflection from a metal reference plate. The ratio is expressed in decibels as return loss or reflectivity. It can be done in an anechoic chamber, with an arch test setup, or with a free-space setup using lenses. Calibration with a metal reference is essential.

Material characterization

If complex permittivity and permeability are measured, the reflectivity of a sheet can be predicted as a function of its thickness using transmission line theory, and then checked against the measurement. This makes it possible to distinguish a material problem from a setup problem.

Variables to check

  • Frequency band: the absorber is designed for a given range, and outside it performance drops.
  • Angle of incidence and polarization: reflectivity changes with both.
  • Thickness and uniformity: these define the frequencies of best absorption, especially in resonant absorbers.
  • Temperature and moisture: these alter permittivity and losses.
  • Backing: the presence of a metal plane behind the absorber has a strong influence.

What the engineer observes

A reflectivity curve with pronounced minima indicates resonant absorption; a flatter curve indicates broadband absorption. Rapid ripples are usually reflections from the setup itself, not from the material.

How to interpret

Compare with the requirement across the entire band and the angles of use, and repeat the measurement to assess repeatability. Record the setup and the reference, since a different arrangement can give different results.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer