24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

Dielectric materials

Clear explanations of concepts, methods, standards and measurements for engineers and technicians.

  • What does the ASTM D495 arc resistance standard describe?

    ASTM D495 describes a dry, high-voltage, low-current arc resistance test on solid insulators, which measures the time an intermittent arc takes to make the surface conductive or damage it.

  • What does the IEC 60112 tracking standard measure?

    IEC 60112 defines the method for determining the proof tracking index (PTI) and the comparative tracking index (CTI) of solid insulating materials, by subjecting their surface to voltage and to drops of a contaminant solution.

  • What does the IEC 60243-1 dielectric strength standard cover?

    IEC 60243-1 describes methods for determining the dielectric strength of solid insulating materials under AC voltage at power frequency, with defined electrodes, media and voltage-rise procedures.

  • What is a dielectric strength tester?

    A dielectric strength tester is an instrument that applies an AC or DC voltage, raised in a controlled way, to insulation or a sample, and detects when the current rises sharply, which indicates breakdown or excessive leakage.

  • What is a dielectric test cell with guard electrodes?

    A dielectric test cell with guard electrodes is a parallel-plate sample holder in which the measuring electrode is surrounded by a guard ring at the same potential, so that the measured current passes only through the volume of the sample.

  • What is a ferroelectric material?

    A ferroelectric material has a spontaneous electric polarization that can be reversed by an external field, which is why it shows hysteresis and a very high permittivity near its transition temperature.

  • What is a frequency-sweep dielectric analyzer?

    A frequency-sweep dielectric analyzer measures the complex permittivity of a material across a wide frequency range, and shows how its polarization and conduction mechanisms respond, from slow to fast relaxations.

  • What is a resonant cavity for measuring materials?

    A resonant cavity for measuring materials is a metal enclosure that resonates at a given frequency; when a small sample is inserted, the frequency and quality factor change, and the permittivity and losses are calculated from those changes.

  • What Is an Insulator and What Is a Conductor?

    An insulator is a material with almost no free charges that can move under an electric field, so it conducts very little current; a conductor has mobile charges in abundance and conducts easily.

  • What is an open-ended coaxial probe?

    An open-ended coaxial probe is a length of coaxial line whose end is pressed against the material; the reflection of a microwave signal depends on the permittivity of what it touches, and the complex permittivity is calculated from it.

  • What Is Breakdown Voltage?

    Breakdown voltage is the voltage at which an insulator loses its ability to insulate and suddenly conducts; it depends on the thickness, the shape of the electrodes, the type of voltage and the condition of the material.

  • What is dielectric polarization?

    Dielectric polarization is the displacement or orientation of bound charges within an insulating material when an electric field is applied, and it is the reason a dielectric stores energy and increases the capacitance of a capacitor.

  • What is dielectric relaxation?

    Dielectric relaxation is the delay with which a material's polarization follows a varying electric field, due to the inertia of dipoles or charges, and it appears as a fall in permittivity and a loss maximum.

  • What is loss tangent?

    Loss tangent, or dissipation factor, is the ratio between the energy a dielectric dissipates as heat and the energy it stores in each cycle; it indicates how imperfect the material is as an insulator or capacitor.

  • What is the arc resistance of an insulating material?

    Arc resistance is the ability of an insulator's surface to withstand an electric arc without becoming conductive; it is expressed as the time the arc takes to form a conductive path across it.

  • What is the comparative tracking index?

    The comparative tracking index (CTI) is the maximum voltage, obtained in a standardized test with a contaminating solution, at which the surface of an insulator holds out without forming conductive carbon paths.

  • What is the complex dielectric constant?

    The complex dielectric constant, or complex relative permittivity, is a complex number whose real part measures the energy stored and whose imaginary part measures the energy dissipated by a material in an alternating field.

  • What Is the Loss Factor of a Dielectric?

    The loss factor, also called tan δ or dissipation factor, is the ratio between the resistive current (which turns into heat) and the capacitive current flowing through a dielectric under alternating voltage.

  • What is volume resistivity?

    Volume resistivity is a material property that measures its opposition to the passage of current through its volume, independent of sample size; it is related to resistance through the geometry.

  • Why Does a Laminate Fail by Delamination?

    A laminate fails by delamination when the bond between layers breaks under stresses that exceed the interlaminar strength, which is usually much lower than the in-plane strength of the fibers, and the problem is aggravated by moisture, impacts, heat and manufacturing defects.

  • Why Does a Material Have High Losses at High Frequencies?

    A material has high losses at high frequencies because, as frequency rises, dipoles and charges no longer follow the field in phase, and this delayed response dissipates energy as heat; moisture, impurities and polar groups also play a part.

  • Why Does an Insulating Material Crack from Temperature?

    An insulator cracks from temperature when the internal stresses produced by differential expansion, uneven cooling or thermal degradation exceed the strength of the material, especially if it is brittle or already has defects.

  • Why does an insulator lose properties with moisture?

    An insulator loses properties with moisture because water, which is polar and carries dissolved ions, penetrates the material or adsorbs on its surface, increasing conductivity, permittivity and losses and reducing surface resistance.

  • Why Does Permittivity Change with Aging?

    Permittivity changes with aging because the material changes chemically and physically: it absorbs water, oxidizes, loses additives, degrades or continues to cure, and each of these processes alters polarization and losses.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer