24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

What does IEC 61000-4-30 define for measuring power quality?

IEC 61000-4-30 defines how to measure power quality parameters in AC networks, with methods, aggregation intervals and performance classes so that measurements are comparable. It does not set acceptable limits.

What it is and what it is not

IEC 61000-4-30 is a standard on measurement methods. It answers “how is it measured?” and not “what value is acceptable?”. Limits are set by other documents, such as regulations, contracts and compatibility or voltage characteristics standards; IEC 61000-4-30 ensures that the number they are compared with has been obtained in a uniform way.

Which parameters it covers

  • Power frequency.
  • Magnitude of the supply voltage.
  • Flicker.
  • Voltage dips, swells and interruptions.
  • Voltage unbalance.
  • Voltage harmonics and interharmonics.
  • Mains signaling voltages, in some cases.

For each parameter it specifies the calculation algorithm, the measurement window and the uncertainty requirements.

Performance classes

The standard defines classes. Class A has the highest accuracy and comparability, for cases such as compliance verification or dispute resolution. Class S is for quality studies and surveys, with less strict requirements. Class B covers older or less demanding instruments, and its role has been shrinking from edition to edition.

Other concepts in the standard

It defines the aggregation of measurements into longer intervals, synchronization with a reference clock, the handling of data during dips or interruptions (flagging) and how to report uncertainty. It also establishes tests to verify that an instrument complies with the class.

How it is used

When choosing an analyzer for a measurement that will be evaluated against a criterion, check that the instrument declares conformity with the required class. When interpreting a report, verify which class and which configuration were used to obtain it.

What to do with this summary

This guide describes only the scope. The requirements for each class and parameter vary between editions; consult the current edition of the standard.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer