24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

Wireless communications

Clear explanations of concepts, methods, standards and measurements for engineers and technicians.

  • What Is a Channel Emulator?

    A channel emulator is an instrument that reproduces, in a controlled and repeatable way, the effect of a real radio channel, such as attenuation, multipath delays, fading and noise, without having to go out into the field.

  • What is a multiple access system?

    A multiple access system is the method that allows several users to share the same communication medium, dividing resources such as frequency, time, code or space among them without their signals destroying each other.

  • What is a real-time spectrum analyzer?

    A real-time spectrum analyzer processes the signal continuously without leaving gaps, so it can detect and display very brief or intermittent events that a conventional swept analyzer would miss.

  • What is a software-defined radio?

    A software-defined radio is a radio in which functions such as modulation, demodulation and filtering are performed by programs running on digital samples, so the same equipment can change standard or band by modifying the software.

  • What Is a Symbol in Digital Communications?

    A symbol is the signal unit a digital system transmits during a fixed interval; each symbol represents one or more bits depending on how many distinct states it can take.

  • What Is a Vector Signal Generator?

    A vector signal generator produces radio-frequency signals with complex digital modulation, controlling amplitude, phase and frequency from I and Q samples, to stimulate receivers and components with real communication formats.

  • What Is a Wireless Protocol Analyzer Used For?

    A wireless protocol analyzer captures and decodes the frames traveling over the air, showing their fields, sequences and timing, to understand why two devices do not communicate well even though the radio signal is correct.

  • What is bit error rate?

    Bit error rate is the proportion of bits received incorrectly relative to the total number of bits transmitted; it is the direct measure of the quality of a digital link and depends on the signal-to-noise ratio and the modulation scheme.

  • What is channel bandwidth?

    Channel bandwidth is the range of frequencies assigned to or occupied by a signal for transmission; it limits the maximum possible data rate and must be narrow enough not to interfere with neighboring channels.

  • What Is Fade Margin?

    Fade margin is the difference, in decibels, between the signal level the receiver gets under normal conditions and the minimum level at which it still works with the required quality.

  • What is modulation and why is it needed?

    Modulation means changing a characteristic of a carrier (amplitude, frequency or phase) with the information to be sent; it is needed because the original signal cannot be transmitted effectively or share the spectrum without it.

  • What is multipath fading?

    Multipath fading occurs when the signal reaches the receiver over several paths with different delays and its components add or cancel according to their phase, so the received level varies even though the transmitter does not change.

  • What is orthogonal frequency division multiplexing?

    Orthogonal frequency division multiplexing (OFDM) distributes data across many narrow subcarriers that are orthogonal to each other, so that each one sees a nearly flat channel and the system withstands multipath better.

  • What Is Receiver Sensitivity?

    The sensitivity of a receiver is the minimum signal level at its input at which it achieves the required reception quality, for example a given signal-to-noise ratio or error rate.

  • What is spread spectrum?

    Spread spectrum is a technique that distributes the signal over a bandwidth much greater than the information requires, using a code known to the receiver, which provides resistance to interference and allows several systems to share the band.

  • What Is the National Frequency Allocation Table (CNAF)?

    The Cuadro Nacional de Atribución de Frecuencias (National Frequency Allocation Table) is the regulatory document that indicates, band by band, which radiocommunication services may use it in Mexico and under what condition.

  • What is the signal-to-noise ratio of a link?

    The signal-to-noise ratio compares the power of the useful signal with the noise power at the receiver; in a link it determines how well the signal can be demodulated and, with that, which data rate and error rate are possible.

  • Why does a wireless link drop at specific times?

    A link that always drops at the same time usually has a cause that is also periodic: interference on a schedule, propagation changes during the day, or machine activity that alters the environment.

  • Why Does a Wireless Sensor Connection Fail in a Plant?

    A wireless sensor in a plant usually fails for lack of link margin: metal blocks and reflects the signal, electrical noise and other radios raise the noise floor, and the battery or antenna limit the rest.

  • Why Does Rain Degrade a Link?

    Rain degrades a link because the drops absorb and scatter the energy of the wave, and the effect grows with frequency and with the distance the signal travels through the rain.

  • Why Does Speed Drop on a Saturated Network?

    On a saturated wireless network speed drops because the channel is a shared resource: each transmission takes up airtime, and with more users, more collisions and more retransmissions, less useful time is left for each one.

  • Wireless Mesh or Point-to-Multipoint Network?

    A mesh network forwards traffic through the nodes themselves and adapts to obstacles and failures, while a point-to-multipoint network connects all nodes to a central station, which is simpler and has more predictable latency but creates a single point of dependency.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer