24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

What is a multiple access system?

A multiple access system is the method that allows several users to share the same communication medium, dividing resources such as frequency, time, code or space among them without their signals destroying each other.

The problem

Spectrum is a limited, shared resource. If two transmitters use the same frequency at the same time, in the same place and with no agreement, their signals overlap and the receiver cannot make sense of either. Multiple access defines the rules to prevent this. The choice of rule conditions the capacity, latency and complexity of the system.

Ways of dividing the medium

  • By frequency: each user is assigned a different portion of the spectrum. It is simple, but leaves resources idle when the user is not transmitting.
  • By time: users share the same frequency in assigned intervals, so synchronization between them is needed.
  • By code: everyone transmits at once in the same band, but each one uses a different code that the receiver exploits to separate them. Capacity is limited by mutual interference.
  • By space: directional antennas or steered beams allow the same frequency to be reused in different areas.
  • By orthogonal subcarriers: subcarriers or groups of them are assigned to different users within a channel.

In practice, systems combine several of these dimensions.

Scheduled access and contention-based access

In scheduled access, a coordinator such as a base station assigns the resources, and the medium is used better under high load, with predictable delays. In contention-based access, each station listens before transmitting and sends if the medium is free; when two transmit at once a collision occurs, and they retry after a random wait. It is flexible and needs no central coordination, but throughput falls with many stations and latency is not guaranteed.

What the engineer sees

In a contention-based network, more users means more retries and a lower effective data rate even if the signal is good. In a scheduled network, throughput per user depends on how many resources it is assigned. An analysis of channel occupancy over time helps distinguish a signal problem from access saturation.

How to choose

Steady, delay-sensitive traffic favors scheduled assignment; sporadic traffic from many devices favors contention.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer