24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

What Is Fade Margin?

Fade margin is the difference, in decibels, between the signal level the receiver gets under normal conditions and the minimum level at which it still works with the required quality.

Definition

In a radio link, the power reaching the receiver is calculated from the gains, the path losses and the cable losses. That is the nominal level. The receiver needs a minimum level, its sensitivity threshold, to achieve the desired error rate. The difference between the two, in dB, is the fade margin.

What it is for

The real signal is not constant. It fluctuates and can fall below the nominal level at certain moments. The margin is the level reserve that lets the link keep working during those drops. As long as the fade is smaller than the margin, the receiver stays above its threshold; if the fade exceeds it, the link degrades or drops.

Which phenomena consume it

  • Multipath: reflections that arrive with different phases and partially cancel.
  • Atmospheric variations: changes in refraction that deflect the beam.
  • Rain: attenuation that becomes dominant at high frequencies.
  • Aging and drift of the equipment and antenna misalignment due to wind.
  • Partial obstruction of the Fresnel zone by vegetation or buildings.

Relationship with availability

A larger margin reduces the probability that a deep fade will exceed the reserve, so availability increases. The relationship is not linear: gaining the last few decibels of availability costs much more margin. That is why the margin is sized from the availability target, the path length, the frequency and the local climate, not with a fixed universal value.

How it is obtained in practice

It can be increased with a higher-gain antenna, a more powerful transmitter within the regulatory limit, lower cable losses, a shorter hop, a more sensitive receiver or a lower-order modulation, which has a lower threshold.

How to interpret the result

If the received level on a measured link is barely above the threshold, the margin is small and any change in weather or alignment will interrupt it. If the measured level is much higher than calculated, it is worth checking whether the condition is exceptional or the calculation was too conservative.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer