The physical mechanism
A water drop interacts with a radio wave in two ways: it absorbs part of the energy and converts it into heat, and it scatters another part in directions other than that of the link. Both effects take power away from the receiver. The result is called rain attenuation, and it is a fade that comes and goes with the precipitation.
What it depends on
- Frequency: the interaction is strong when the size of the drops approaches the wavelength. That is why the effect is negligible in low bands, while in the high microwave and millimeter-wave bands it can dominate the design.
- Rain intensity: more water per unit of time means more attenuation per kilometer.
- Distance: total attenuation is what accumulates along the rainy stretch, so long links suffer more. A localized storm may affect only part of the path.
- Polarization: large drops flatten as they fall, so horizontal polarization tends to be attenuated somewhat more than vertical.
Secondary effects
Rain does more than reduce the level. It can depolarize the signal, which degrades systems that reuse frequencies with opposite polarizations. It also wets antennas and radomes, and a film of water on them adds attenuation of its own.
What an engineer sees
In the logs, the received signal level drops in step with the rain, with rapid recovery when it ends. Equipment with adaptive modulation reduces the modulation order to maintain the link, and capacity falls instead of the connection being lost. If there are total outages, the margin was insufficient.
How it is designed for
The design includes a rain fade margin, calculated with statistical rain intensity data for the region and with the availability required of the link. Hops can also be shortened, a lower band used, antenna gain increased, adaptive modulation exploited or route diversity provided for. Choosing a margin is not a matter of a universal figure: it depends on the local climate, the frequency and the availability target.