24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

What is a software-defined radio?

A software-defined radio is a radio in which functions such as modulation, demodulation and filtering are performed by programs running on digital samples, so the same equipment can change standard or band by modifying the software.

Fundamental idea

In a traditional radio, each function is fixed in dedicated analog circuits. In a software-defined radio the analog section is reduced to the essentials, that is, antenna, filters, amplification and frequency conversion, and the signal is digitized as early as possible. From there on, modulation, demodulation, synchronization and decoding are programs running on a processor, a programmable logic device or a computer.

Typical blocks

  • Antenna and front end: a filter, a low-noise amplifier and a mixer that moves the signal to an intermediate frequency or to baseband.
  • Analog-to-digital converter: it samples the signal. Its speed and number of bits limit the visible bandwidth and the dynamic range.
  • Digital processing: filtering, decimation, demodulation and decoding.
  • Transmit path, if present: a digital-to-analog converter, mixer and amplifier.
  • Reference oscillator: it determines the frequency accuracy and stability of the whole unit.

What is gained

Flexibility: the same platform receives signals of very different kinds, is updated through software and allows experimenting with algorithms. For learning and diagnostics, it is an inexpensive way to see the spectrum and decode protocols.

Limits worth knowing

  • Instantaneous bandwidth is limited by the sampling and by the connection to the computer.
  • Affordable models have moderate dynamic range: a strong nearby signal can saturate the input and produce false images and spurs.
  • Frequency accuracy depends on the reference oscillator, and its drift with temperature affects measurements.
  • They normally do not replace a calibrated instrument for compliance measurements, because their level accuracy is not guaranteed.

What the engineer sees

A spectrum and waterfall display that can be explored across the tuned band. If signals appear that change position when the gain is varied, they are probably saturation products. Transmitting with this equipment requires compliance with the spectrum regulations of each band.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer