24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

What Is a Wireless Protocol Analyzer Used For?

A wireless protocol analyzer captures and decodes the frames traveling over the air, showing their fields, sequences and timing, to understand why two devices do not communicate well even though the radio signal is correct.

The type of problem it solves

A link can have an excellent signal level and signal-to-noise ratio and still perform badly: association does not complete, packets are lost to retries, throughput drops for no apparent reason or a device never manages to connect. These faults are not in the physical layer, they are in the behavior of the protocol. The analyzer sees what the devices are saying to each other.

How it works

A receiver tuned to the channel of interest captures the signal, demodulates it and reconstructs the frames. It then decodes them layer by layer, showing headers, addresses, frame types, sequence numbers, flags and payload. Each frame carries a timestamp, which makes it possible to study the sequence and the delays between messages.

What it can answer

  • Whether a device sends the connection request and what response it receives, or whether it receives none.
  • How many frames are retransmitted and why, which relates to errors or collisions.
  • Which parameters the devices negotiated: rates, channels, security.
  • What percentage of channel time is used by data and how much by management and control.
  • Whether there are stations or access points with incompatible configurations.

How it combines with radio measurement

The protocol analyzer and the spectrum analyzer complement each other. If the first shows many retries, the second indicates whether the cause is interference, low level or collisions between stations. Many diagnoses require both points of view.

Limitations

  • It only captures what the analyzer’s receiver hears well: if it is far away, it may miss frames that did reach their destination and lead to the wrong conclusion.
  • Encrypted traffic is visible in its headers, but the payload cannot be read without authorization and legitimate keys.
  • It observes one channel at a time; in systems with hopping or several radios, capture must be done in parallel.

Traffic capture must be carried out only on your own networks or with express authorization, because the frames may contain private information.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer