Both compare an instrument with a reference, but they answer different questions. Calibration asks what the relationship is between the indication and the reference value, and with what uncertainty. Verification asks whether or not the instrument meets a given requirement. The first produces values; the second, a pass or fail conclusion.
Key differences
| Aspect | Calibration | Verification |
|---|---|---|
| Result | Errors or corrections with uncertainty | Meets or does not meet the requirement |
| Traceability | Documented chain to standards | Depends on the method and standard used |
| Use of the result | Correcting readings, evaluating drift, assigning values | Deciding whether to keep using the instrument |
| Depth | Normally more points and analysis | May be limited to key points |
When to calibrate
- When you need to apply corrections to readings.
- When the instrument serves as a standard for calibrating others.
- When a customer or regulation requires documented traceability.
- When you want to analyze drift to adjust the interval.
When verification is enough
- Between calibrations, as an intermediate check with a control standard.
- When the acceptance criterion is wide compared with the capability of the instrument.
- For auxiliary indicating instruments with no influence on product quality.
How to decide
Start from the risk: what happens if the instrument measures incorrectly. If the consequence is significant, the more complete information from a calibration is justified. If the instrument only indicates a trend, periodic verification may be sufficient. In any case, it is advisable to document the criterion and not to substitute one for the other unless the procedure allows it.
Verification against a standard without traceability does not offer the same confidence as a calibration, even if the result says it passes.