24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

Why do cells break with microcracks?

Silicon cells are very thin, fragile wafers. Microcracks appear as a result of mechanical and thermal stresses during transport, installation and operation, and they can grow with cycling until they isolate areas of the cell that stop producing.

Why silicon is vulnerable

Crystalline silicon is a brittle material. A cell is a fraction of a millimeter thick, and a crack starting from an edge or a solder joint can propagate with little energy. The cell does not bend like a metal; when the stress exceeds what it can tolerate in an area with a defect, it cracks.

Where the stresses come from

  • Handling and transport: vibration, impacts, incorrect stacking of the modules.
  • Installation: stepping on the modules, overtightening the clamps or mounting them on an uneven structure.
  • Wind and snow loads, which flex the module repeatedly.
  • Daily thermal cycles, which expand and contract materials with different coefficients and concentrate stress at the solder joints.
  • Hail and other impacts.

What consequences the crack has

A crack does not always reduce power immediately. The damage depends on whether it isolates part of the cell from the metal contacts. An isolated area stops contributing and forces the rest to conduct more current. Over time, cycling can open the crack and the loss grows. A partially isolated cell can also give rise to a hot spot.

How they are detected

They are not usually visible to the naked eye. Electroluminescence, which makes the cell emit light by passing a current through it in the dark, shows inactive areas and crack traces. The I-V curve can show a loss of current or fill factor, but does not locate the cause. Thermography reveals cells with anomalous behavior.

How to reduce the risk

This is achieved through careful handling and mounting practices, well-leveled structures, modules designed to distribute stress, and inspection on receipt and after installation. A cracked cell does not always call for immediate replacement; the decision depends on the extent of the inactive area and how it evolves.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer