How a lithium-ion cell works
Lithium ions move between two electrodes through an electrolyte, while electrons flow through the external circuit. During charging, the ions migrate to the anode; during discharge, they return to the cathode. A separator prevents contact between the electrodes and lets the ions pass.
What sets chemistries apart
What changes most is the cathode material. The anode is usually graphite, although there are variants with silicon or titanate. The most frequently mentioned chemistries are named after the cathode:
Common families
- LFP (lithium iron phosphate): good thermal stability and long cycle life; lower energy per unit mass and a very flat voltage curve.
- NMC (nickel, manganese, cobalt): higher energy per unit mass, with variants using different metal ratios.
- NCA (nickel, cobalt, aluminum): high energy and good power.
- LCO (cobalt oxide): high energy in portable electronics, less used in vehicles.
- LTO (lithium titanate): a special anode with very long life and fast-charging capability, at the cost of lower energy.
Design trade-offs
No chemistry is best at everything. Increasing energy tends to reduce thermal stability or life; improving safety tends to take away energy. The engineer chooses according to the use: a vehicle that needs range, stationary storage that prioritizes cycles and safety, or a tool that requires power.
What an engineer sees in practice
The chemistry determines how voltage is interpreted: in a flat-curve chemistry, voltage says little about the state of charge, and estimating it is harder. It also sets the charge and discharge voltage limits that the BMS and the charger must respect, so a charger configured for another chemistry can damage the cell.
Notice
Lithium cells can undergo thermal runaway under electrical, mechanical or thermal abuse. They must be handled, tested and stored by qualified people, with the appropriate safety measures.