24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

What does the IEC 61851 conductive charging series cover?

The IEC 61851 series sets out the requirements for electric vehicle conductive charging systems: charging modes, the control pilot function, station electrical safety, and specific requirements for DC charging.

What it is and who it is for

IEC 61851 is a series of international standards for equipment that connects an electric vehicle to the grid through a metallic contact, that is, conductive charging, as opposed to inductive. It is aimed at manufacturers, installers and laboratories that evaluate charging stations and their interaction with the vehicle. This guide describes its general scope; the specific requirements and values depend on the current edition and must be consulted there.

How it is organized

  • General requirements: define the system architecture, the charging modes, the control pilot function between station and vehicle, the connection conditions and the requirements for safety against electric shock.
  • DC charging stations: add the requirements for stations in which the conversion is outside the vehicle.
  • DC digital communication: addresses communication between station and vehicle in those systems.
  • Electromagnetic compatibility: sets emission and immunity requirements for the equipment.

Technical ideas worth knowing

The charging modes classify architectures by the level of communication and protection. In the mode with control pilot, the station and the vehicle communicate through a dedicated conductor: the station reports the maximum available current and the vehicle signals its states, so that the station energizes the connector only when the vehicle is connected and ready. This avoids having voltage on an exposed connector.

The standard also deals with protection against electric shock, the continuity of the protective conductor, behavior under fault conditions, and marking and instruction requirements.

How it is used in practice

Station tests take the standard as a reference: state sequences, the response to loss of ground or pilot failure, the accuracy of the current offered and the protection functions are verified. A vehicle simulator helps work through these scenarios.

When it does not apply

The series does not regulate high-level vehicle-to-grid communication or connector geometry, which are covered by other standards. Assessing compliance requires the current edition and the version recognized in the country or in the project specification.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer