What this standard is for
When two manufacturers publish specifications for a digitizer, those figures are only comparable if they mean the same thing and were obtained with the same procedure. IEEE 1057 provides that common basis: it defines the terms and describes the methods for measuring the behavior of an instrument that digitizes waveforms. Its scope is the instrument as a complete system, from the analog input to the stored data, and not just the internal converter.
What kind of content it has
- Terminology: definitions of concepts such as resolution, gain, offset, linearity, bandwidth, rise time and noise.
- Test methods: procedures for determining each characteristic, with the appropriate stimulus signals and the mathematical treatment of the acquired data.
- Dynamic metrics: the use of sine fits to the data to evaluate behavior at different frequencies, from which the effective number of bits is obtained.
- Time-domain and frequency-domain characteristics: step response, time base jitter and distortion.
What it means in practice
An engineer reading a digital oscilloscope datasheet sees figures for bandwidth, vertical resolution and effective number of bits. The standard is the framework that explains what “effective” means and how it is obtained, and why an instrument with a nominal resolution of eight bits delivers a lower effective resolution at high frequencies, because noise and distortion consume part of it.
What it is not
It does not impose performance limits that an instrument must meet, nor does it replace calibration with traceability. It describes how to characterize, not what value each parameter should have. Nor is it a safety standard.
How to use it
Use it as a reference when you need to interpret or verify a specification, or when you need to document an evaluation procedure for a digitizer. Because standards are revised and their content changes between editions, always consult the current edition and confirm whether it applies to your type of instrument.