What this series is for
For a vehicle to charge at a station from another manufacturer, three things have to match: the connector geometry, the electrical layout of its contacts and the communication protocol. IEC 62196 covers the first two, along with the safety requirements for the connectors themselves. Its general scope is described here; the details depend on the edition in force.
General structure
- General requirements: these apply to all types. They address protection against contact with live parts, temperature rise in service, mechanical properties, resistance to aging, protection against water and dust ingress, durability under repeated insertion, and insulation distance.
- AC connectors: these define the dimensions of several types, including Type 1, which is single-phase, and Type 2, which supports single-phase and three-phase charging, as well as the layout of the control pilot and proximity contacts.
- DC connectors: these define configurations for direct-current charging, including those combined with the AC connector.
What an engineer sees
A connector can be physically compatible and still fail to charge if the vehicle and the station do not agree on the protocol. Conversely, a worn connector or one with a damaged locking mechanism can fail even though its geometry complies. In practice, failures show up as heating at the contacts, a lock that does not engage, or water ingress.
Associated tests
Typical tests include contact resistance measurement, temperature rise at rated current, insulation resistance and dielectric strength, insertion and withdrawal force, mechanical durability and ingress protection rating. The numerical criteria depend on the edition and the connector type.
When it does not apply
The series does not define how the equipment communicates or how the installation is sized. To evaluate a specific connector, use the edition in force of the relevant part.