24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

Pre-compliance testing or certification testing?

Pre-compliance tests are exploratory, are carried out during development with simpler instruments, and aim to find and correct problems; certification tests are formal, performed at a validated site with calibrated instruments, and produce the report that supports the declaration of conformity.

Each one answers a different question

A pre-compliance test asks: is there a risk of failing, and where? A certification test asks: does it formally comply with the requirements of the standard? Confusing them leads to expecting an official result from a test that cannot give one, or to spending a formal test on a design that is not ready yet.

Pre-compliance

  • It is done during design and with prototypes, at in-house facilities or at a laboratory.
  • It uses lower-cost instruments and less strict conditions.
  • It allows iteration on the same day: measure, modify, measure again.
  • Its uncertainty is greater, so it demands a margin relative to the limit.

Certification

  • It is done on a representative product, at a validated site and with calibrated, traceable instruments.
  • It follows the method of the standard in detail, with defined detectors and configuration.
  • It produces a report with uncertainty and test conditions.
  • Its result supports the declaration of conformity, in accordance with the applicable market requirements.

What to expect from each

Aspect Pre-compliance Certification
Goal Discover and correct Demonstrate conformity
Environment Variable Controlled and validated
Required margin Wide Whatever the standard sets
Timing During development With a stable design

When one cannot replace the other

Passing a pre-compliance test does not guarantee passing the formal one: differences in environment, configuration or method can cost a few decibels. That is why a margin is left. Nor is it advisable to skip pre-compliance: a failure in the formal test forces the cycle to be repeated, with the cost of laboratory time and design changes.

In practice, the most efficient order is continuous pre-compliance during design and a formal test once the product is frozen.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer