The essential difference: how heat is transferred
In a bath, a stirred fluid surrounds the probe and envelops it completely, so that thermal contact is very good and the temperature is very uniform. In a dry block, heat passes by conduction from a metal block to the probe through a well, and the clearance between the two is a thermal barrier that the fluid in a bath does not have.
What you gain with a bath
- Better axial and radial uniformity in the working zone.
- It accepts probes of various diameters, lengths and shapes, even with heads or bends.
- It makes it possible to calibrate fast-response probes without depending on the diameter of an insert.
Its costs are stabilization time, handling of the fluid (oil, water or mixtures depending on the range), vapors, weight and the need to clean the probe afterwards.
What you gain with a dry block
- Portability for on-site calibrations.
- Relatively fast temperature changes, with no fluids.
- Clean, simple operation.
Its limit is contact: if the well is wider than the probe, the air between them produces errors from poor conduction. In addition, the gradient along the well makes immersion depth weigh heavily on the result.
How it looks in a real calibration
With a dry block, two identical probes can show different differences depending on the insert used. With a bath, the spread between repetitions is usually smaller. A common sign of poor contact in a block is that the reading of the reference probe and that of the instrument under test approach each other slowly and keep changing long after the setpoint has stabilized.
How to choose
If the goal is the highest possible accuracy, or if probes of irregular geometry are being calibrated, a bath is advisable. If you are looking to verify instruments in the plant quickly and the probes fit well in suitable inserts, the dry block is practical. In both cases, the uncertainty of the calibration medium (uniformity, stability, immersion) must be evaluated and not assumed to be zero.