The principle
Interference appears when an unrelated signal reaches the receiver at a level that lowers its signal-to-interference ratio below what is tolerable. Planning channels means controlling that ratio at each receiver: choosing frequencies and powers so that the desired signals exceed the unwanted ones by a sufficient margin.
Types of interference that are planned for
- Co-channel: another transmitter on the same frequency. It is reduced with distance, directional antennas or natural shielding.
- Adjacent channel: energy from one channel that spills into its neighbor because of imperfect filtering. It is avoided with guard bands or by leaving channels free between nearby transmitters.
- Intermodulation and spurious products: mixing products of several signals in non-linear stages. They are detected by measurement and avoided by combining frequencies well.
How it is done
- An inventory of transmitters is drawn up, and the width of each channel and the frequencies allowed by regulation are established.
- The distance or isolation between them and the expected levels at the receivers are estimated.
- Frequencies are assigned; those that are reused are placed as far apart as possible, and contiguous channels are avoided between nearby transmitters.
- The power is adjusted: transmitting more than necessary increases interference to others without improving your own link.
- The plan is verified with measurements and corrected.
What is seen in practice
A spectrum analysis shows which channels are occupied and how strongly, and occupancy over time reveals intermittent transmissions that a single sweep does not detect. A channel that looks free when measured at one instant may be used in bursts by another system.
When it does not apply in its simple form
In unlicensed bands shared with outside systems, not all users are under control. Planning is limited to choosing the least occupied channels, maintaining margins and reviewing periodically, because the environment changes. In licensed bands, coordination takes place with the authority and the other license holders.