What is measured
Viscosity is a fluid’s resistance to flow. For oils, kinematic viscosity is almost always reported; it relates dynamic viscosity to the density of the fluid and is expressed in square millimeters per second (equivalent to the centistoke). Dynamic viscosity is obtained by multiplying the kinematic viscosity by the density at the same temperature.
Capillary method
- The glass viscometer is filled with the specified amount of sample.
- It is immersed in a thermostatic bath and left until the oil reaches the test temperature.
- The liquid is drawn up above the upper mark and allowed to descend by gravity.
- The time the meniscus takes to pass between two marks is measured with a timer.
- The time is multiplied by the calibration constant of the viscometer.
The measurement is repeated to verify that the determinations agree within the method tolerance.
What makes it delicate
- Viscosity changes greatly with temperature, so bath control is critical and the reporting temperature must always be stated.
- The glass must be clean, free of particles and bubbles.
- The tube must be vertical and the viscometer constant must be current.
- A tube must be chosen with a flow time within the recommended range.
Why it matters
Viscosity influences oil circulation by convection, heat transfer, pump operation, and paper impregnation. A more viscous oil cools less effectively, and this matters more at low ambient temperatures, when the equipment starts cold.
How to interpret the result
Compare it with the new oil and with the applicable specification. A gradual increase accompanies oxidation and sludge formation; an unexpected decrease suggests dilution with a lighter liquid or contamination.