24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

Charging at home or at a public station?

Home charging is slower and cheaper to install and happens while the vehicle is parked; public charging offers higher power and availability away from home, with more variables of access, communication and compatibility.

Two different uses

Home charging takes advantage of the time the vehicle is parked. Since many hours are available, moderate power is enough. Public charging meets a different need: recovering range away from home or on long trips, where time counts and more power is sought.

What changes technically

  • Type of current: at home it is almost always alternating current, with the conversion in the vehicle’s charger. A public station may offer AC or high-power DC.
  • Infrastructure: a public station shares a transformer, protective devices and metering with other equipment, and requires communication for authorization and billing.
  • Compatibility: the connector and protocol must match those of the vehicle. At home the equipment is chosen for your own vehicle; in public, it is not.

The home installation

The critical point is not the charger but the circuit that feeds it. A continuous load of several hours heats conductors and terminals that never work that hard in normal household use. A dedicated circuit, adequate protective devices, a good ground connection and well-tightened terminals are advisable. An old installation or one with doubtful splices is a greater risk than the power of the equipment.

What to check first

Before choosing, compare the capacity of the service entrance with the total demand of the home, verify the grounding system and check the condition of the panel. If capacity is limited, a charger with power management or adjustable current avoids overloading the installation.

When to use each option

Anyone with a fixed overnight parking spot usually covers almost all of their needs at home and uses public stations occasionally. Anyone without access to their own installation depends on the public network, and the usage pattern changes. A home installation must be carried out by qualified personnel in accordance with the applicable electrical regulations.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer