24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

Arc flash face shield or full hood?

An arc flash face shield protects the face and eyes with a shield and usually needs additional protection for the neck and head; a full hood covers the head, neck and face in a single piece and is the option for higher energy levels.

What changes between the two

Both protect against the thermal radiation and fragments of an electric arc. The main difference is coverage. The face shield is a visor that covers the face and attaches to a hard hat or headgear; on its own it leaves the neck and the back of the neck exposed, so it is supplemented with a balaclava or another arc-rated item. The full hood is a garment that wraps around the head and neck, with a transparent front window, and it is worn with the hard hat underneath or integrated, depending on the design.

Comparison criteria

Aspect Face shield Full hood
Coverage Face and forehead; the neck depends on the balaclava Head, neck and face together
Comfort Lighter and better ventilated More heat and restricted movement
Visibility Wide shield, easy to lift Limited window, with less side vision
Typical use Tasks with moderate incident energy Tasks with high incident energy
Maintenance Replaceable shield and support Washable garment with interchangeable window

How to decide

  1. Take the incident energy from the arc flash study and the protection category required for the task.
  2. Choose equipment whose tested rating equals or exceeds that value.
  3. Ensure compatibility with the hard hat, glasses and other items.
  4. Consider the duration of the task, the ambient heat and the need for communication.

A practical detail

A face shield that is displaced by the impact or that leaves the neck uncovered significantly reduces the real protection. That is why the complete system is evaluated as a whole, not item by item. At high energy levels, a full hood is the most common solution, often combined with a ventilation system to make the heat tolerable.

Work involving an arc flash hazard must be carried out by qualified personnel following the applicable regulations.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer