24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

What guidance does IEEE C57.104 give on gases in transformers?

IEEE C57.104 is a guide to interpreting the gases generated in oil-immersed transformers, with criteria based on concentration, generation rate, and fault type for deciding on follow-up actions.

General scope

IEEE C57.104 is a guide for interpreting the gases generated in oil-immersed transformers. It describes how the gases form, how they are detected, and how to use the results to assess the condition of the equipment and decide what to do next. It is an interpretation guide, not a test method or an oil specification.

What it addresses

  • Gas generation: thermal and electrical causes of combustible gases and carbon oxides.
  • Evaluation by concentration: levels per gas and for total combustibles, grouped into equipment condition categories associated with more or less urgent actions.
  • Evaluation by generation rate: the rate at which gases increase, which usually carries more weight than the absolute value.
  • Interpretation methods: such as the key gas method, gas ratios, and graphical representations.
  • Recommendations on sampling frequency and actions according to condition.

What an engineer sees in practice

The result of an analysis is placed in a condition category, and the recommendation is to maintain, increase the sampling frequency, investigate, or take action on the unit. Combining the category with the trend avoids reacting to a value that is high but stable.

How to use it well

  1. Work with the current edition.
  2. Review the sample quality before interpreting.
  3. Use the equipment trend, not just general tables.
  4. Take into account equipment type, age, and operating conditions.

When it does not apply

The criteria are general and do not replace the manufacturer’s experience or the assessment of each case. The guide focuses on mineral oil, so other fluids require their own references. Any decision to intervene on a transformer must be made by qualified personnel.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer