24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

What is an oil filtration machine?

An oil filtration machine is a mobile unit that pumps oil through filters, and in some models through a heater and a vacuum chamber, to remove particles, water, and gases from insulating oil.

Direct answer

It is an assembly of pump, filters, and accessories mounted on a cart or trailer that connects to the transformer, storage tank, or container to treat the oil in a closed circuit. Depending on its configuration, treatment covers particles only or also water and gases.

Common components

  • Transfer pump and hoses with sealed connections.
  • Particle filters in coarse and fine stages, with a differential pressure gauge to detect saturation.
  • Oil heater with temperature control.
  • Vacuum chamber with vacuum pump and condenser (in dehydration and degassing units).
  • Sensors and protective devices: level, temperature, pressure, and emergency stop.

Two classes of treatment

Simple filtration removes particles and some free water, and is sufficient for cleaning. Vacuum treatment adds dehydration and degassing, which are essential for filling or topping up transformers and for lowering moisture.

What an engineer sees in practice

The differential pressure across the filters rises as they saturate, and the cartridges are then changed. The volume is recirculated several times, and water, particles, and dielectric strength are verified. A connection with an air leak causes bubbles and loss of efficiency.

What it does not do

It does not remove acids or dissolved sludge, nor does it restore oxidized oil; reclamation exists for that purpose. Nor does it dry the transformer paper on its own.

What to check first when selecting or using one

  1. Which contaminant has to be removed.
  2. Flow capacity relative to the equipment volume.
  3. Cleanliness of hoses and connections before use.
  4. Compatibility with the type of oil.

Connection to and operation with transformers must be carried out by qualified personnel, with the equipment de-energized.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer