24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

Semi-anechoic chamber or open-area test site?

A semi-anechoic chamber controls the environment and allows testing at any hour and in any weather, at the cost of installation and absorbers; an open-area test site avoids the limitations of walls but depends on ambient noise and weather. Both are acceptable if validated for the frequency range.

What is needed from an emissions site

A radiated emissions test site must offer a conductive, reflective ground plane and an environment where the only signals present are those of the equipment, with no other unwanted reflections. It is validated by a site attenuation measurement, which verifies that its behavior matches the theoretical one.

Open-area test site

  • Clear land with a metal plane on the ground and no reflective structures nearby.
  • It is faithful to the theoretical model at low frequency, because there are no walls to interfere.
  • It is exposed to radio, television and cellular transmitters and to any nearby source, so much of the band is unusable or requires discrimination.
  • It depends on the weather, and the equipment stays outdoors or under a non-metallic cover.

Semi-anechoic chamber

  • A shielded enclosure with absorbers on the walls and ceiling and a reflective metal floor.
  • It isolates from the outside environment, which makes it possible to measure low levels at any time.
  • Its quality depends on the absorbers: at low frequency they are less effective and require volume, so the distance and the size of the equipment constrain the site.
  • It requires investment and maintenance, and it must be validated periodically.

How to decide

Criterion Open area Semi-anechoic
Ambient noise High, variable Isolated
Repeatability Depends on the day High
Large equipment More space available Limited by the enclosure
Operating cost Low if the land exists High investment

In an urban area, ambient noise usually makes an open-area site impractical across much of the spectrum, which is why the chamber is the most common solution. The standards accept both if the site is validated, and the results should in principle be comparable.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer