24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

Dry-type or oil-immersed transformer?

An oil-immersed transformer cools better and handles more power and voltage, while a dry-type unit avoids oil and reduces fire risk, but has limits on size and environment.

The underlying difference

Both transformers do the same thing electrically. What changes is the medium that insulates and removes heat. In a dry-type unit, air and solid materials such as resin or varnish perform both functions. In an immersed unit, the oil insulates and carries heat from the windings to the walls and radiators.

Comparison

Aspect Dry-type Oil-immersed
Cooling Air; less effective Oil; very effective
Power and voltage range More limited Covers distribution through power classes
Fire risk Low; no combustible oil Higher, except with high-flash-point fluids and containment measures
Installation Indoors, close to the load Indoors with safeguards, or outdoors with a pit
Sensitivity to the environment Dust, moisture and pollution affect the insulation Closed tank protects the windings
Diagnostics Inspection, thermography, partial discharge Oil analysis and dissolved gases, in addition to electrical tests

What weighs in the decision

  • Location: in buildings, hospitals or places with many people, a dry-type unit avoids oil and simplifies protection requirements.
  • Capacity: for large ratings and high voltages, oil is almost mandatory because of its ability to cool and insulate.
  • Environment: in dusty or humid atmospheres, a dry-type unit needs additional cleaning and protection.
  • Maintenance: oil offers a rich source of diagnostic information but demands sampling and leak control; a dry-type unit requires fewer interventions, but its internal faults are harder to anticipate.

When a direct comparison does not apply

There are high-flash-point fluids, such as esters, that bring immersed units closer to applications once reserved for dry-type units. There are also cast-resin and vacuum pressure impregnated dry-type units, which behave differently with respect to moisture and overload. The choice must start from the installation requirements and the applicable safety regulations, not from a general rule.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer