Equipment for switching, detection and verification
Hot stick and hook rental for outage work in Monterrey
Hot sticks for outage work are high-safety insulated tools. They are used to perform switching without direct contact, verify the absence of voltage and install grounding sets during maintenance on de-energized power networks.
- Opening and closing: remote operation of disconnectors, blade switches and circuit breakers at medium and high voltage.
- Voltage verification: use of attached detectors to confirm that a line is completely de-energized before repairs begin.
High-voltage detector rental in Monterrey
A high-voltage line detector protects electricians by verifying whether a line or piece of equipment is energized. Its purpose is to prevent fatal accidents and electric shocks before any maintenance work.
- Accident prevention: gives a visual and audible warning if dangerous voltage is present on high-voltage cables.
- Non-contact detection: identifies the electric field radiated by live conductors without touching them.
- De-energization check.
- Fault tracing.
High-voltage two-pole phase tester hot stick rental in Monterrey
The DETEX two-pole phase tester verifies the potential difference between two conductors in medium-voltage electrical systems. It makes it possible to identify whether two lines belong to the same phase, check the phase sequence before interconnections, verify fuse continuity and confirm safe conditions during maintenance. It is a tool for personnel working on electrical distribution networks of up to 36 kV.
High-voltage “chicharra” detector rental in Monterrey
We offer high-voltage chicharra rental in Monterrey, Nuevo León, for substations. These are manually operated or power-assisted tools that make adjusting and tightening connections and components in electrical systems faster and safer. Rental is an alternative for contractors and maintenance personnel who need a specialized tool without buying it outright.
Buzzer detector rental for detecting high voltages in Monterrey
The "buzzer" type detector (also called an acoustic detector, proximity detector or tic tracer) gives an audible and visual warning if a cable, overhead line or piece of electrical equipment is live before you touch it. Its main function is to prevent an electrician from suffering an accidental fatal shock.
Wireless high-voltage detector rental
Equipment for safely measuring voltage in medium- and high-voltage systems through wireless communication between the sensor and the receiver unit. It delivers digital readings without direct connections and reduces operator exposure to energized areas. It is used for maintenance, inspection, verifying the absence or presence of voltage, commissioning tests and diagnostics of power networks.
High-voltage AC phase detector rental
Wireless, non-contact high-voltage AC phase detectors for verifying the presence of voltage and identifying phases. They work by detecting the electric field, without touching the conductor, and are useful for maintenance, inspection and diagnostics on lines, transformers, substations and distribution systems. They allow high-voltage checks without buying the equipment.
Equipment for insulation and transformer testing
Power factor test equipment rental for transformers
Power factor or tan delta test equipment evaluates the insulation system of power and distribution transformers, bushings, cables and other high-voltage equipment. It measures dielectric losses and capacitance to detect moisture, contamination, insulation aging, paper and oil degradation and internal defects before they cause a failure.
Digital DC high-voltage voltmeter
The Kikusui 149-30A is a portable digital voltmeter for safely measuring high DC voltages of up to ±30 kV. Its 1000 MΩ input impedance avoids loading the circuit under test. The 4½-digit LED display gives clear readings in industrial or laboratory environments.
Hipot rental for verifying electrical insulation
The Hipot (high potential) test, also called a withstand voltage or dielectric strength test, verifies the integrity of electrical insulation. It applies a voltage far above the normal operating voltage between an energized conductor and a ground plane, to ensure that no harmful leakage current flows.
High-voltage insulation tester rental in Monterrey
We rent high-voltage insulation testers for evaluating insulation resistance in motors, transformers, cables, panels, generators and other electrical equipment. They apply a controlled test voltage and measure insulation resistance to detect deterioration, moisture, contamination or potential faults. They are a tool for preventive maintenance, diagnostics and verification of industrial installations and medium- and high-voltage equipment.
Insulation resistance tester rental
The insulation resistance tester (megohmmeter or Megger) evaluates the condition of the insulation in cables, transformers, motors and generators. It applies a high direct current (DC) voltage to measure leakage current and calculate the resistance in megohms (MΩ) or gigohms (GΩ). In this way it detects faults due to deterioration, moisture or contamination preventively, before a short circuit occurs.
Megger rental for insulation resistance
An insulation megger (or megohmmeter) measures the resistance of the material that protects cables and electrical parts. Modern models include Polarization Index (PI) and Dielectric Absorption Ratio (DAR), which measure insulation health over time to detect moisture and deep contamination.
VLF equipment rental for XLPE cable testing
The very low frequency (VLF) high-voltage generator performs withstand tests and diagnostics on systems with high-capacitance insulation. It allows acceptance testing, preventive maintenance and insulation assessment on power cables, motors, generators and other equipment, in accordance with international practices for VLF testing.
TTR rental for transformer testing
TTR (Transformer Turns Ratio Tester) equipment rental serves electrical maintenance companies, contractors, transformer manufacturers and high-voltage testing specialists who need to verify the turns ratio, polarity and winding condition of power and distribution transformers. It detects shorted turns, incorrect connections, tap changer (TAP) faults and other problems.















