24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

What does the IEEE 1451 smart transducer series propose?

The IEEE 1451 series defines a common way to describe sensors and actuators and connect them to a network, so that each transducer identifies itself and delivers data in a standard format without manual configuration.

The problem it seeks to solve

Integrating sensors from different manufacturers into acquisition systems means manually configuring the sensitivity, range, units and calibration of each one. A data entry error, or moving a sensor to another channel, produces false measurements. The series proposes that the sensor carry that information with it and communicate it in a standard way.

Central idea: the electronic data sheet

The key concept is the transducer electronic data sheet, known as TEDS. It is a memory inside or next to the sensor that stores its identification, type, range, sensitivity, calibration information and other data. The acquisition system reads it and configures the channel automatically, which allows plug-and-play operation.

Separation between transducer and network

The series proposes dividing the system into two parts: a module that interacts with the transducer, which includes conditioning and conversion, and an application processor connected to a network. A network-independent interface is defined between the two, so that the same sensor can be connected to different networks by changing only the adapter. Different parts of the series cover variants of the interface, for example with point-to-point, digital or wireless connections.

What the engineer sees in practice

  • Sensors that are recognized when plugged in and configure themselves.
  • Traceability: the calibration data travels with the sensor and does not go astray.
  • Fewer scaling errors between the sensor and the system.

How to interpret its value

The standard does not improve the sensor’s accuracy; it only ensures that the descriptive information is correct and available. If the data sheet is out of date because the sensor was recalibrated and the sheet was not updated, the system will use wrong values. That is why calibration management is still necessary.

Each part of the series has its own scope; for specific requirements, consult the current edition of the applicable part.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer