24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

What measurement methods does the IEEE 81 guide describe?

The IEEE 81 guide describes how to measure soil resistivity, the resistance or impedance of grounding systems and surface potentials, including fall-of-potential methods and four-electrode arrays.

The IEEE 81 guide is a reference on measurements in grounding systems. While other guides focus on design, this one deals with how to check in the field what was designed, or how to characterize the ground before designing.

Groups of measurements it covers

  • Soil resistivity: four-electrode arrays, such as Wenner and Schlumberger, and the interpretation of results in uniform and layered soils.
  • Resistance or impedance of a grounding system: fall of potential and its variants, including the choice of distances for the auxiliary electrodes.
  • Surface potentials: surveys to verify step and touch voltages at an installation.
  • Continuity: verification of conductors and joints.
  • Measurements on large systems: considerations on distances, interference and the effects of buried conductors.

Why the methods matter

A resistance reading without a method is meaningless. The value depends on where the auxiliary electrodes are placed, their separation relative to the size of the system, the noise present and the frequency of the test current. The guide explains the fundamentals of each method so that you know when it is valid, what errors appear and how to detect them.

Relationship with other guides

The substation grid design guide and this measurement guide complement each other: one defines criteria and calculations, and the other how to obtain the field data and verify the built result. The industrial grounding guide deals with system architecture and schemes.

How to use it

It is used to select a method according to the size of the system and the site conditions, to document the procedure and to justify the validity of the readings. Since the content changes between editions, the current edition and the procedure required by the project must be consulted. Measurements on energized systems must be made only by qualified personnel, under the applicable safety regulations.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer