24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

What is the maximum power point?

The maximum power point is the point on the I-V curve where the product of voltage and current is highest; the inverter searches for it continuously with a tracking algorithm because it shifts with light and temperature.

Why a maximum exists

In a module, current is almost constant at low voltage and drops quickly near the open-circuit voltage. Power is the product of the two. At zero voltage, power is zero because there is no voltage; at zero current it is zero as well. Between these two extremes lies a point where the product is highest. That is the maximum power point, and it sits at the knee of the I-V curve.

Why it moves

The position of the point is not fixed. With more irradiance, current rises and the point moves upward. With higher temperature, voltage falls, the point moves to the left and power decreases. Shading and mismatch between modules can create several local maxima on a string curve, not just one.

How the inverter follows it

The load sets the operating point. If the inverter connected a fixed load, the module would operate far from the maximum most of the time. That is why inverters and optimizers include maximum power point tracking, known by its acronym MPPT. A common method is to slightly perturb the operating voltage, observe whether power rises or falls, and move in the direction that improves it. It is a continuous process that repeats all the time.

What an engineer sees in practice

  • The inverter input voltage moves during the day as conditions change.
  • Under partial shade, some algorithms settle on a lower-power local maximum and output drops more than expected.
  • With unequal strings on the same inverter input, tracking cannot optimize all of them at once.

An example

When a cloud passes, current falls and the MPP shifts; the algorithm readjusts the voltage within seconds or less. If the algorithm is slow, energy is lost during rapid changes in irradiance. Tracking efficiency is one of the characteristics of the inverter.

The maximum power point should not be confused with the module’s rated power, which is defined at standard test conditions. Electrical work on a solar array must be carried out by qualified personnel in accordance with current regulations.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer