What it shows
The I-V curve plots a module’s current against its voltage, from one end where its terminals are short-circuited to the other where they are open. Each point on the curve is a possible operating condition: the connected load decides at which of them the module works. It is the most complete description of a module’s electrical behavior at a given instant.
The points that are read
- Short-circuit current: the end with zero voltage. It is the maximum current and is almost proportional to irradiance.
- Open-circuit voltage: the end with zero current. It changes little with irradiance and falls as temperature rises.
- Maximum power point: where the product of voltage and current is greatest, at the “knee” of the curve.
What a healthy curve looks like
A nearly flat region at high current that falls off gently, a well-defined knee and a final descent toward the open-circuit voltage. The slope of the flat section and of the final section gives information about the parasitic resistances: series resistance rounds the knee and reduces the voltage, and shunt resistance (leakage) tilts the flat section.
What changes it
- Irradiance: shifts the curve up or down in current.
- Temperature: shifts the curve in voltage, downward with heat.
- Shading, soiling or damaged cells: deform the curve with steps.
- Degradation: increases series resistance or reduces current.
How to interpret the result
When measuring in the field, irradiance and cell temperature must be recorded along with the curve; without them, comparison with the datasheet is meaningless. Steps point to conducting bypass diodes or mismatch between cells. A low open-circuit voltage suggests damaged cells or short-circuited diodes; a low short-circuit current suggests soiling, shading or loss of transparency.
The module generates voltage as long as there is light, so connections and measurements in the field are the responsibility of qualified personnel following the applicable safety regulations.