24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

What Is Reproducibility in a Measurement?

Reproducibility is the precision of a measurement when conditions change: a different operator, instrument, laboratory, location or time, even though the same thing is measured with the same method.

If repeatability asks whether you get the same result when you repeat everything identically, reproducibility asks whether you get it when something changes. That change may be the operator, the instrument, the laboratory, the time or the environment. Because more sources of variation add up, the dispersion is equal to or greater than that of repeatability.

Which conditions are varied

  • Different operators applying the same procedure.
  • Different instruments or equipment of the same type.
  • Different laboratories or sites.
  • Different days or seasons, with variation in the environment and in the condition of the instrument.

When reporting reproducibility, you must state which conditions changed, because the concept is relative to them. There is also an intermediate case, intermediate precision, which varies only some factors, typically within a single laboratory over time.

What the engineer sees in practice

Two shifts measure the same part and systematically get different results. If each operator is consistent with himself or herself but there is a difference between them, the problem is one of reproducibility: it may be due to placement technique, contact pressure, interpretation of the procedure or differences between instruments. A repeatability study does not provide that information.

How it is reduced

  1. Write the procedure precisely, including the measurement conditions.
  2. Train operators to the same criteria.
  3. Control temperature and other relevant environmental factors.
  4. Calibrate instruments against common references.

When it does not apply

If there is only one operator, one instrument and one location, reproducibility in the strict sense cannot be evaluated; what is observed in that case is repeatability or, over time, intermediate precision. One must not be presented as the other.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer