24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

What is metrological traceability?

Metrological traceability is the property of a measurement result whereby it can be related to a reference, normally a national or international standard, through an unbroken, documented chain of calibrations, each with its own uncertainty.

Metrological traceability means that you can demonstrate where the confidence in a reading comes from: your instrument was calibrated against a standard, that standard against another of higher rank, and so on up to the realization of the unit at a national metrology institute or an international reference. If any link is missing or undocumented, the chain breaks and the result is no longer traceable, even if the instrument works well.

What the chain must have

  • Continuity: each calibration uses a standard that was itself calibrated, with no gaps.
  • Documentation: each link has a certificate or record identifying the standard used and the conditions.
  • Uncertainty: each step adds its own, so uncertainty grows as you move away from the reference.
  • Common unit: the chain ends at the definition of the unit in the International System.

Why it matters in practice

An engineer encounters traceability when two laboratories or two plants compare measurements of the same part and need the numbers to be comparable. Without a common reference, everyone would have their own scale. It is also the reason a certificate must state which standards were used to calibrate the instrument: without that information there is no way to verify the chain.

What traceability does not guarantee

An instrument being traceable does not mean it is accurate at this moment or suitable for any application. Traceability tells you how the result relates to the reference and with what uncertainty; suitability for a process depends on that uncertainty compared with the tolerance you need to control. Nor is it inherited forever: the instrument can drift after calibration, so the chain is renewed through periodic calibrations.

How to check it

  1. Verify that the certificate identifies the instrument and the standards used.
  2. Confirm that those standards have their own current, traceable calibration.
  3. Check that the stated uncertainty is compatible with what you need to measure.
  4. Check that the unit and scope cover the range in which you actually use the instrument.
We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer