What it is and where it comes from
Hydrogen sulfide, H₂S, forms when sulfur-bearing organic matter decomposes without oxygen. It occurs in drains and treatment plants, in septic tanks and sumps, in tank sludge, in the oil and petrochemical industry and in paper and tanning processes. It can also be released when disturbing sediments that had trapped it.
How it causes harm
The gas is absorbed through the lungs and blocks an enzyme that cells need in order to use oxygen. Even if the blood carries oxygen, the tissues cannot make use of it. The nervous and respiratory systems are the most affected. At low concentrations it irritates the eyes and airways; at high concentrations, a person can suddenly lose consciousness.
The odor trap
At low concentrations it has a characteristic rotten-egg odor, perceptible in very small amounts. This creates a false impression that the sense of smell is enough of an alarm. It is not: with continued exposure the sense of smell adapts and, at high concentrations, the gas paralyzes the olfactory receptors. Just when the risk is greatest, the odor disappears. That is why the absence of odor does not prove the absence of gas.
Other relevant properties
- Denser than air: it tends to collect in low areas, pits and tank bottoms.
- Flammable: besides being toxic, it forms flammable mixtures with air.
- Corrosive: it attacks certain metals and can degrade equipment.
- Soluble in liquids: it can be released when a liquid is stirred or heated.
How it is detected and controlled
It is measured with specific electrochemical sensors, included in personal and area multi-gas detectors. Samples are taken at different levels, especially near the bottom. The alarm is set to act with a margin before harmful levels are reached. Controls include ventilation, isolation of sources, careful sludge cleaning and, when air quality cannot be guaranteed, supplied-air respiratory protection.
If the alarm sounds
The correct response is to get out immediately and raise the alert, not to investigate the source from inside. A coworker must never go in to rescue another without suitable respiratory protection and a rescue plan. Exposure limits and control decisions depend on current regulations and must be applied by trained people.
This guide is for information only. Work involving electrical hazards, heights or hazardous atmospheres must be carried out by qualified, authorized personnel in accordance with applicable regulations.