24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

What is the EN 50160 standard and what does it describe?

EN 50160 describes the characteristics of the voltage supplied by public distribution networks, such as frequency, magnitude, dips, interruptions, harmonics and unbalance, and sets how far they must be maintained under normal operating conditions.

What it deals with

EN 50160 is a European standard on the characteristics of the voltage at the supply terminals of public distribution networks at low, medium and, depending on the edition, high voltage. It describes what can be expected of the voltage and imposes no obligations on the customer’s equipment. Its approach is that of a description of the voltage quality delivered by the network, which can be incorporated into contracts or regulations.

Parameters covered

  • Network frequency.
  • Variations in voltage magnitude.
  • Rapid changes and flicker.
  • Voltage dips, swells and interruptions.
  • Transient overvoltages.
  • Voltage unbalance.
  • Harmonics, interharmonics and signaling voltages.

How it is evaluated

For continuous parameters, the standard proposes a statistical evaluation: measurements are taken over an observation period and the values are required to stay within the limits for a percentage of the time. For events, such as dips or interruptions, it gives indicative values, since their frequency depends heavily on the network and the location. Measurement usually relies on the methods of IEC 61000-4-30.

What it does not guarantee

It is not a guarantee that the voltage will always be within limits. It excludes exceptional conditions such as faults caused by third parties, extreme natural phenomena and cases of force majeure. Nor does it replace the electromagnetic compatibility of the connected equipment.

When it applies

Its direct application is to European networks, but it is used as a reference in other countries, sometimes with adaptations, when there is no equivalent local document or for comparison. In Mexico, the criteria applicable at the point of connection are in local regulations; EN 50160 serves only as a technical reference, never as a substitute.

What to do with this summary

This guide gives the general scope. Limit values and observation periods change between editions; consult the current edition before using them.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer