24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

What Is Directivity?

Directivity is the ratio of an antenna's radiation intensity in a given direction to the average intensity over all directions; it indicates how much the radiated energy is concentrated toward one side compared with a source radiating equally everywhere.

Definition

Directivity compares the antenna with an ideal reference: one that radiates the same total power uniformly in all directions. It is defined as the ratio of the radiation intensity in a given direction to the intensity that uniform source would have. If no direction is stated, the direction of maximum radiation is understood. Being a ratio, it is dimensionless, and it is usually expressed in decibels.

Relationship to the pattern

An antenna that concentrates its energy in a narrow beam has higher directivity, and one with a broad pattern has lower directivity. The average over the sphere is the same for any antenna with the same radiated power; therefore, whatever is concentrated in one direction is taken from the others. No passive antenna creates power: it only redistributes it.

Difference from gain

Directivity depends only on the shape of the pattern. Gain also includes the antenna’s efficiency, that is, the losses from heating in conductors and dielectrics. Gain equals directivity multiplied by efficiency. That is why gain never exceeds directivity, and the two coincide in a lossless antenna.

How it is obtained

  • By integrating the three-dimensional radiation pattern: the total radiated power is calculated by integrating the intensity over all directions, and the directivity follows from its ratio to the maximum.
  • By an approximation from the beamwidths in two principal planes, useful as an estimate for antennas with a single main lobe and low side lobes.

What the engineer sees

On an antenna data sheet it appears as directivity or, more often, as gain. For efficient antennas the difference is small, but in small antennas or those with lossy materials it can be appreciable.

When the distinction matters

When designing or comparing small antennas, or antennas in portable devices, efficiency can be low and directivity alone will give an overly optimistic impression of range. Gain is what is used for the link budget.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer