What it is and how it works
A self-contained breathing apparatus, known by the abbreviation SCBA, isolates the wearer from the environment. A compressed air cylinder is carried on the back. A valve and regulator reduce the cylinder’s high pressure to a manageable pressure and feed a full-face mask. On exhalation, the air leaves to the outside through a valve. Because the air breathed comes from the cylinder, it works in atmospheres without oxygen or with contaminants.
Main components
- Cylinder of compressed air, made of steel or composite materials.
- Valve and regulator that control pressure and flow.
- Full-face mask that seals to the face.
- Harness with straps to carry the assembly.
- Pressure gauge and low-pressure alarm that warns when little reserve remains.
Positive pressure
In positive-pressure demand units, the mask maintains a pressure slightly higher than the outside pressure. If there is a small leak in the seal, air flows outward instead of contaminant coming in. This is the configuration used for atmospheres dangerous to life and for rescue.
Open and closed circuit
The most common type is open circuit: exhaled air is released to the environment. There are closed-circuit units that recycle exhaled air and allow longer duration, with greater complexity. Their use requires specific training.
Limitations
- Limited duration: it depends on the air volume of the cylinder and the breathing rate. Physical exertion and stress reduce the actual time.
- Weight and bulk: the cylinder on the back makes it hard to pass through small openings.
- Vision and communication: the mask limits both.
- Fit: without a correct seal, which is verified with a fit test, protection fails. Beards or facial hair interfering with the seal are common problems.
Where it is used
In confined space rescue, in emergencies with an unknown atmosphere and in entries with immediate danger. Also in work where an air line is not possible because of distance or geometry.
Conditions of use
It requires training, medical fitness, periodic maintenance and inspection, and filling cylinders with breathing-quality air. Exit time is always planned with a reserve. Selection and use must be in the hands of trained personnel and in accordance with current regulations.
This guide is for information only. Work involving electrical hazards, heights or hazardous atmospheres must be carried out by qualified, authorized personnel in accordance with applicable regulations.