A grounding system is made up of bare conductors, electrodes and connections that establish deliberate electrical contact with the soil. It gives fault, lightning and discharge currents a low-impedance path to earth and keeps potential differences at the surface within tolerable limits.
Main functions
- Personnel safety: limit step and touch voltages during a fault.
- Protection operation: allow enough current to flow for protective devices to detect the fault and trip.
- Potential reference: provide a common reference point for the system and the equipment.
- Energy dissipation: discharge lightning and surge currents into the soil.
Why the soil is part of the circuit
Current entering the soil does not follow a conductor: it spreads through the volume of the soil. The resistance of the system depends on the geometry of the electrodes and on the resistivity of the surrounding soil. That is why two systems with the same buried copper can behave very differently in different soils.
What it consists of
A typical system includes horizontal conductors in a grid or ring, vertical rods, welded connections or connections made with suitable connectors, and taps to structures and equipment. The weak points are usually the joints, not the conductor.
What is reviewed in an evaluation
The items normally verified are the resistance of the system to earth, the continuity between its parts and the connected equipment, the condition of the joints and, in critical installations, step and touch voltages. A system can meet the resistance requirement and still be unsafe if continuity to a piece of equipment is missing.
How to interpret the result
A low resistance value is desirable, but it is not the only criterion. What determines safety is the potential that appears on the surface when fault current flows. Acceptance values depend on the application and the current standard.
Work on grounding systems in energized installations must be performed by qualified personnel, following the applicable safety regulations.