A ground rod electrode is a vertical element of circular cross-section that is driven in or inserted into a borehole to make contact with deeper soil layers. It is among the most widely used electrodes because it is easy to install and takes advantage of deep layers, which tend to be wetter and more stable.
Types by material
- Copper-clad steel: a steel core provides the mechanical strength for driving, and the copper cladding provides conductivity and corrosion resistance as long as the layer remains intact.
- Solid copper: highly resistant to corrosion in most soils, but soft and more expensive, which makes it hard to drive to great depth.
- Galvanized steel: the zinc layer protects the steel but is consumed over time; its life depends on how aggressive the soil is.
- Stainless steel: chosen in corrosive soils or when long life is wanted, with lower conductivity than copper.
- Chemically filled rod: a hollow tube with salts that are released into the ground to reduce the local resistance.
What determines performance
The resistance of a rod depends mainly on its length and on soil resistivity, and much less on its diameter. Doubling the length reduces the resistance noticeably; making it thicker hardly changes it. Several rods in parallel help only if they are spaced far enough apart.
Selection
The choice depends on the corrosivity of the soil, the hardness of the ground (whether the rod has to be driven or a hole drilled), the required service life and compatibility with the other buried metals, to avoid galvanic couples. Joints between sections must maintain electrical continuity and mechanical strength.
When one rod is not enough
In high-resistivity soils or with rock close by, a single rod cannot achieve the required resistance; arrays, horizontal conductors or grids are used. The electrical standard in force and the project requirements must be met.