24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

What is a forced convection oven for testing?

A forced convection oven is a heated enclosure with a fan that recirculates the air to achieve a uniform temperature, and it is used for thermal aging tests and for drying and curing samples.

What sets it apart

In a natural convection oven the air moves only through density differences, and hotter zones appear at the top and colder zones at the bottom. In a forced convection oven a fan circulates the air over the heating elements and through the entire working volume, which reduces gradients and speeds up heat transfer to the samples.

How it works

Electric heating elements heat the air. A controller compares a sensor reading with the setpoint temperature and modulates the power. A second, independent limiter cuts off heating if the temperature exceeds a safety value. The air flows through ducts or baffles and returns to the heating elements.

Typical testing uses

  • Thermal aging of plastics, elastomers, insulators and adhesives.
  • Preconditioning of samples at a defined temperature.
  • Drying of samples before weighing or measuring properties.
  • Stabilization and curing of coatings or resins.
  • Operating tests at elevated temperature.

What determines test quality

The temperature that matters is that of the sample, not that of the air at the sensor. A massive part takes time to reach equilibrium, and the test time must be counted from when the part reaches temperature. The load must not block the airflow or touch the walls. The uniformity of the working volume is verified with several distributed sensors.

How to interpret the result

In aging, the progress of deterioration with temperature follows an Arrhenius-type relationship in many materials, but this holds only as long as the degradation mechanism is the same at all temperatures. Raising the temperature too far can activate a different mechanism, such as melting or other reactions, and the result no longer represents actual use.

Safety

Flammable materials or materials that release combustible vapors must not be placed in an oven that is not designed for them. Components that emit gases require adequate ventilation or extraction.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer