24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

What is a fault event recorder?

A fault event recorder is a device that continuously monitors electrical signals and saves, with a timestamp, the data from the moments before, during and after a disturbance.

What it does

An electrical fault lasts a fraction of a second. If nobody records it, only its consequences remain. The event recorder permanently monitors voltages, currents and contact states, and when a condition falls outside the configured limits, it saves the block of data surrounding the event.

How it detects an event

  • By threshold: a voltage or current rises above or falls below a level.
  • By change of state: a digital input opens or closes, such as a breaker or a protection trip.
  • By sudden variation: a rapid jump in a quantity.
  • By manual or external request.

The device keeps a circular buffer, so it can also deliver what happened before the trigger, which is where the cause usually lies.

Data it delivers

Voltage and current waveforms, a timestamped event list and, depending on the device, derived quantities. Synchronizing the clocks between recorders makes it possible to compare what each point in the system saw and reconstruct the order in which things happened.

How to analyze a record

  1. Locate the moment of the event and examine what happened just before.
  2. Identify the type of disturbance: dip, overvoltage, short circuit, phase loss, large load starting.
  3. Observe whether the current rose before the voltage dropped (downstream fault) or whether the voltage changed first (power supply problem).
  4. Check the protection sequence: which devices operated, in what order and whether they did so in the expected time.

What limits its usefulness

A record is only as good as its configuration: very tight thresholds generate piles of irrelevant events, and wide thresholds miss the important ones. The sampling rate must be compatible with the phenomenon. And if the clocks are not synchronized, devices cannot be compared.

Installing recorders on energized circuits must be done by qualified personnel in accordance with applicable regulations.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer