24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

What guidance does the IEEE C57.91 loading guide give?

IEEE C57.91 is a guide on how to estimate temperatures, insulation aging and loading capability of mineral-oil-immersed transformers under different load cycles and ambient conditions.

What problem it addresses

A transformer nameplate states a capacity under reference conditions. In real operation, the load changes over time and so does the ambient temperature. The loading guide offers a framework for answering how much load the unit can carry, for how long, and at what cost in insulation life.

Core ideas

  • Thermal model: relates the load to the top oil temperature and to the winding hot spot temperature, based on the losses, the ambient temperature and the thermal time constants of the oil and the winding.
  • Insulation aging: paper degradation depends on the hot spot temperature and accelerates with it. The guide converts the temperature profile into a measure of accumulated loss of life.
  • Load cycles: makes it possible to evaluate variable daily loads, emergency peaks, and short-term or long-term overloads.
  • Other limits: besides the winding, capacity can be limited by bushings, the tap changer, connections or current transformers.

How it is used

  1. The transformer data are gathered: losses, heat run test results and cooling characteristics.
  2. The load profile and expected ambient temperature are defined.
  3. The evolution of the temperatures is calculated with the model equations.
  4. The result is evaluated against the criteria the user adopts for temperature and loss of life.

An example

A substation loses one transformer and the other takes on the full load for a few hours. The thermal model shows whether the hot spot reaches levels that significantly shorten insulation life, and whether the oil will have time to cool afterward. The decision on what is acceptable rests with the operator.

When it does not apply

The guide refers to mineral-oil-immersed transformers. Other fluids and dry-type transformers require other criteria. In addition, the models are an approximation and must be checked against measured temperatures where they exist.

The guide is revised over time; the current edition must be consulted, and this description gives only the general scope.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer