24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

What Does the ETSI EN 300 328 Standard Cover?

ETSI EN 300 328 is a European harmonized standard that sets spectrum and efficient channel use requirements for wideband transmission equipment in the 2.4 GHz band.

What it covers in general terms

ETSI EN 300 328 is a European harmonized standard for wideband transmission systems operating in the 2.4 GHz ISM band. It applies to data equipment such as Wi-Fi, Bluetooth and proprietary radios that use spread-spectrum techniques or wideband modulations. Its purpose is to let many devices share a license-free band without degrading one another.

Why it exists

In an unlicensed band nobody coordinates who transmits. The standard replaces that coordination with rules that each device must meet individually: limiting how much power it radiates, how much bandwidth it occupies and how it behaves toward other users. If everyone complies, the band remains usable.

Groups of requirements

  • Radiated power: evaluated as equivalent isotropic radiated power (EIRP), which includes antenna gain, and its spectral density.
  • Channel occupancy: the bandwidth the signal actually uses and how energy is distributed across the band.
  • Adaptivity: mechanisms to detect other transmissions and yield the channel, such as listening before transmitting, or to avoid occupied frequencies.
  • Duty cycle: limits how long the equipment transmits.
  • Unwanted emissions: spurious and out-of-band emissions.
  • Receiver: tolerance to nearby interfering signals, since a fragile receiver also degrades coexistence.

What an engineer sees in the lab

Measurements are made with a spectrum analyzer, a power meter and, for radiated tests, a suitable chamber or test site. The result often depends on the antenna: a radio that complies with one antenna may stop complying with another of higher gain, because the EIRP changes.

When it does not apply or is not enough

It is a European standard. In other countries the telecommunications authority sets its own rules, which may be similar but are not identical, and equipment that conforms to ETSI is not automatically authorized on that basis. Nor does it cover electrical safety or general electromagnetic compatibility, which are dealt with in other standards.

Tests, methods and limits change between editions, so consult the current edition and the regulations of the country where the equipment will be sold.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer